What did you do to your 120 today?

[BlakMoth Avid PP Poster! Find all posts View Profile Close BlakMoth]

It was quite easy to do. The cooler is a Davies Craig 678.
It was $139 from Supercheap. Keep an eye out as they have specials all the time.
Also keep an eye on Tin as he is making a bracket for it that will suit the 120 soon.
Which will make the install easy as pie.
All you will need then is a 3/8 brass joiner and an extra 1m length of hose to be safe, and a litre or so of T-IV tranny fluid.


Sent from my iPhone using Crapatalk

[craigm Addicted PP Member Find all posts View Profile Close craigm]

(Yesterday) - Spent all morning cleaning the 120 following a fantastic weekend down in Coffs. Next step will be spending a good day to try and polish out the bush Pinstripes. I know there's a few there that will now be a permanent reminder of the weekend had...

Before.




After

[big-trev Senior Member Find all posts View Profile Close big-trev]

Rear Draws as per 4wdaction Mag

Started my Rear Draws,
In 4wdaction issue 228 on page 40 to 44 there is a section on building your own draws.So I thought looks like a great idea.So I have started my own trial Draws.

[juc33_prado Advanced Member Find all posts View Profile Close juc33_prado]

(Yesterday) - Spent all morning cleaning the 120 following a fantastic weekend down in Coffs. Next step will be spending a good day to try and polish out the bush Pinstripes. I know there's a few there that will now be a permanent reminder of the weekend had...

Before.




After

looks like a photoshop picture

you didn't really clean it did you!

any other pics/vids from the weekend?

SAM

[BiLLz0r Advanced Member Find all posts View Profile Close BiLLz0r]

Started my Rear Draws,
In 4wdaction issue 228 on page 40 to 44 there is a section on building your own draws.So I thought looks like a great idea.So I have started my own trial Draws.

I saw this too and thought it was great idea. Well done so far. The misses saw me reading the article and just said No! and kept walking. Lol

[DJD120GXL Senior Member Find all posts View Profile Close DJD120GXL]

thanks for the info, I'll have a look at Supercheap..

http://www.supercheapauto.com.au/onl...ecommendations

is it this one, it says 3-4Lt engine, but model is 677

also who is Tin? cheers

It was quite easy to do. The cooler is a Davies Craig 678.
It was $139 from Supercheap. Keep an eye out as they have specials all the time.
Also keep an eye on Tin as he is making a bracket for it that will suit the 120 soon.
Which will make the install easy as pie.
All you will need then is a 3/8 brass joiner and an extra 1m length of hose to be safe, and a litre or so of T-IV tranny fluid.


Sent from my iPhone using Crapatalk

[rorza Member Find all posts View Profile Close rorza]

This is the one you're after; http://www.supercheapauto.com.au/onl...ecommendations

and this is Tin's thread. I'me sure he'll post soon regarding the brackets for the 120, so watch this space (Post #54 is the 120 bracket he is working on); http://www.pradopoint.com/showthread...819#post499819

[BiLLz0r Advanced Member Find all posts View Profile Close BiLLz0r]

Installed 2 USB blank plates into the front of the Prado. Powered them off the 12V wires for the accessory socket next to them. They fit great and work great. Only 2.1Amp across both ports but fine for 4 phones (or 2 phones and 1 tablet when we're away). I also ran 2 3 meter Apple Lightning cables to the rear tucked under the center console for the kids to play and charge at the same time (and keep the quiet in the car on those long trips (i.e. anything over 10mins for the 6yo haha)).
https://dl.dropboxusercontent.com/u/...rtlocation.jpg
Close Up:
https://dl.dropboxusercontent.com/u/...ts/Closeup.jpg

[Shangus Find all posts View Profile Close Shangus]

Fitted up some sliders from a certain AJ120 fellow, you guys probably never heard of him but he does bloody good work highly recommended.





Took em out for a run as well but they scared all the rocks away...

[Fearless Junior Member Find all posts View Profile Close Fearless]

Yesterday 4pm. Got my baby back from the panel beaters. At Last. Been gone since 2 Jan when the wheel fell off.

All up, I think it was about $8000 worth of repairs. Good thing insurance covered it.

Now just to check all the other wheel studs to make sure it does not happen again.

[AJ120 Out of control poster! Find all posts View Profile Close AJ120]

Gave it a wash ready for a trip to the big smoke this weekend. I am a bit concerned how it will go, 5-600kms and none of it dirt, not sure if the old girl will be able to handle that

Cheers Andrew

[zutta Senior Member Find all posts View Profile Close zutta]

LOL AJ. Mate i really think you should look into another vehicle for this one. Sounds nasty :P

[BlakMoth Avid PP Poster! Find all posts View Profile Close BlakMoth]

Finally remembered to flip the switch panel up so the wife doesn't knock em with her knee.




Sent from my iPhone using Crapatalk

[Bushbasher Out of control poster! Find all posts View Profile Close Bushbasher]

[QUOTE=BlakMoth;501187]so the wife doesn't knock em with her knee. ]

I was going to comment on how your missus could possibly knock those switches with her knees, but decided against saying anything that could be miss-interpreted. Keep her in the passenger seat mate - it's easier and safer. (But there, I did anyway).

[BlakMoth Avid PP Poster! Find all posts View Profile Close BlakMoth]

Ha ha it's much better on my sanity with her in the passenger seat yes. But occasionally I like to be the one that has a few drinks so I have to get her to drive.


Sent from my iPhone using Crapatalk