Does anyone know how to replace interior light

[Spurio Senior Member Find all posts View Profile Close Spurio]

Does any one know how to get access to replace the front interior light without breaking bits??? Its the one with the sunglasses holder in the roof lining ?

I can't find any screws and I think it might be a clip-in assembly ?? I'm thinking removal of the cover surrounding the switches may allow access???

Hello me pradopointers, your my only hope

[plucker Advanced Member Find all posts View Profile Close plucker]

I'm onto it. Let you know later if I find out.

[Signature035 Advanced Member Find all posts View Profile Close Signature035]

I recently replaced the globes in the 2 main interior lights with LED's. On one side of the opaque cover you will see 2 small slots, that if you insert a small screwdriver into will release the clips that hold the opaque cover in place. Comes off really easy, so if it appears stuck......don't force it, the clips probably haven't released.

Hope this helps

[plucker Advanced Member Find all posts View Profile Close plucker]

Sorry about the slow response but Signature035's answer was spot on.
Just out of curiosity, Signature035 where did you the LEDs for these?

[Signature035 Advanced Member Find all posts View Profile Close Signature035]

LED's were from Fleabay, China. the ones you need are the 31mm size. I found some 9 LED versions that throw a very strong crisp white light. I've done the same right through the Camper as well.

[clifton Advanced Member Find all posts View Profile Close clifton]

LED's were from Fleabay, China. the ones you need are the 31mm size. I found some 9 LED versions that throw a very strong crisp white light. I've done the same right through the Camper as well.

Hi Signature 035,
Do they dim like the incandescent festoon lamps.

[Signature035 Advanced Member Find all posts View Profile Close Signature035]

Apologies for the delay.....yes, they do dim just like the OEM globes.