I've posted this on another forum, Toyota Nation, and there was no result.
I'll copy/paste the content from there.
I just changed both of my front wheels' wheel bearings, because it was starting to break down.
I've taken great precaution about the wheel bearings' inner & outer side, and triple checked it.
After changing the wheel bearings, the ABS & brake system warning lights popped on, and after scouring the internet, and ended up in TN, I tried to reset the error by short-circuit pin 4 & 13 on the OBD, and it worked, or so I thought.
After short-circuiting pin 4 & 13, the ABS popped back after about 200m, and then the brake system warning light too after about 1km.
I tried resetting again, and the problem comes back under the same condition.
The original wheel bearing was NSK, and I changed it with Koyo wheel bearing.
I was wondering whether the ABS sensor is only suitable with NSK. I have checked the brake fluid level, and it's normal.
I'll copy/paste the content from there.
I just changed both of my front wheels' wheel bearings, because it was starting to break down.
I've taken great precaution about the wheel bearings' inner & outer side, and triple checked it.
After changing the wheel bearings, the ABS & brake system warning lights popped on, and after scouring the internet, and ended up in TN, I tried to reset the error by short-circuit pin 4 & 13 on the OBD, and it worked, or so I thought.
After short-circuiting pin 4 & 13, the ABS popped back after about 200m, and then the brake system warning light too after about 1km.
I tried resetting again, and the problem comes back under the same condition.
The original wheel bearing was NSK, and I changed it with Koyo wheel bearing.
I was wondering whether the ABS sensor is only suitable with NSK. I have checked the brake fluid level, and it's normal.
Comment