Announcement

Collapse
No announcement yet.

Fuel Gauge Issues after gas conversion

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Fuel Gauge Issues after gas conversion

    Hi guys,

    The issue I have is that most of the time my gauge reads empty. When the main tank is filled it shows half a tank and drops pretty fast from there.

    I've been doing some digging around on here to try and solve my problem but to no avail.

    A few threads suggested keeping the power off for a few hours and then turning the car back on. This didn't really change a thing.

    It was also suggested that a bad earth could be the problem. I scored and reconnected every earth I could find and then repeated the battery trick. Sadly nothing.

    ​​​​​​
    A few other posters suggested that the resistor that is meant to be placed on the line could either be faulty or incorrect. So I pulled out the rear passenger seat and took a look.

    This is what I found. One empty socket and a plug full of sealant/caulk. I did not however find a line that had obviously been altered to include a resistor as I expected.

    Can anyone point me in a good direction here?





    edit: just to make it clear the car was converted to lpg before we owned it, so I'm only just walking into this mess.
    Jetprado
    Lurker
    Last edited by Jetprado; 12-02-2020, 11:26 PM.
Working...
X