D.I.Y My fridge socket fit out - rear power gauge added

[Hubble80 Member Find all posts View Profile Close Hubble80]

Re: D.I.Y My fridge socket fit out - rear power gauge added

Nice setup mate!!!

I bet the back of the phone gets nice and cold too being in front of the vent!!! :mrgreen: :mrgreen: :mrgreen:

[RustyTruck Member Find all posts View Profile Close RustyTruck]

Re: D.I.Y My fridge socket fit out - rear power gauge added

Sorry to bring up a old topic.

But is the DIY instructions of this thread missing or is it me :?:

Looking at a couple of Baintech Cigarette sockets in the back of my Prado running off the Aux battery. Spoke to the local auto elec and was quoted around $200 to fit them with 'heavy wiring'.

Plugs I have ready to install:
http://www.baintech.com.au/sockets/bain ... r-+-ciga-s
http://www.baintech.com.au/sockets/bain ... iga-socket

Any info (incl where to get wire, fuses etc from) or DIY for this would be greatly appreciated.

Thank you,

RT

[two+four Advanced Member Find all posts View Profile Close two+four]

Re: D.I.Y My fridge socket fit out - rear power gauge added

RT this is one of the threads that has been affected by Matts departure

You should be able to heavy duty wire at Jaycar and I am sure many auto shops will have it as well. The autoshops (super cheap etc) should have your fuses and other bits and pieces.

Neil

Sorry to bring up a old topic.

But is the DIY instructions of this thread missing or is it me :?:

Looking at a couple of Baintech Cigarette sockets in the back of my Prado running off the Aux battery. Spoke to the local auto elec and was quoted around $200 to fit them with 'heavy wiring'.

Plugs I have ready to install:
http://www.baintech.com.au/sockets/bain ... r-+-ciga-s
http://www.baintech.com.au/sockets/bain ... iga-socket

Any info (incl where to get wire, fuses etc from) or DIY for this would be greatly appreciated.

Thank you,

RT

[Guest Close Guest]

Re: D.I.Y My fridge socket fit out - rear power gauge added

Yes the DIY is missing as the original author left and delted all his posts.

I am going to lock this thread for that reason. If someone else wants to do a DIY it would be great. post up a new thread. This one ios sadly obsolete now..