Suspension Measurements 2

[KMKPrado]

suspension 2

Forgot to measure using this method but here are the results, had the lift now for a month or two. Bilstein & Lovells, alloy bar, dual battery, cargo drawers, full fuel. Rear 815mm, Front 785mm

[samo]

not bad for standard CJ but she/he definately needs to come on to higher ground, if the powers of be allow.

[CJ]

3 week old prado with standard suspension

Front:745mm (ARB steel bar only)
Rear:780mm (70ltrs fuel)

[craig]

I have measured mine with about 165lt of fuel.

front 770mm
rear 830mm

[Chippy]

Thanks Chippy,

If you look carefully at the first post, you would notice that it is already has been updated with your car measurements this morning :lol:

Good luck with the lift, looks good!

You're too quick for me Stan ops:

.... maybe it's the thin air from sitting this high up. :lol: :shock: :? 8)

Cheers
Chippy

[lc120_man]

New measurements

Thanks Chippy,

If you look carefully at the first post, you would notice that it is already has been updated with your car measurements this morning :lol:

Good luck with the lift, looks good!

[Chippy]

So I just have to chuck some empty airbags in for another 15 mm of lift ....

SSWWWEEEEEEEEETTTTTT !!

:lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol:

Cheers
Chippy

[Chippy]

New measurements

Average front measurements

2" OME lift with alloy bar= 810 mm(with bash plate and dual battery)

Average rear measurements

2" OME lift = 820 mm (180 L fuel load, 100 + Kgs in rear plus another spare on the roof rack))

Cheers
Chippy

[Mike]

Measurements for my standard V6 with about 90 litres of fuel. An ARB bar goes on soon so I will see how much difference it makes.

Front = 745mm
Rear = 770mm

[Llamaboy]

I have taken our measurments, looks like I am about average
At the time of measurment the Prado had:
90l in the tanks
unladen draws empty fridge
roof top tent and bars
Alloy Bar and dual Batteries

Our Prado GX 03, had its suspension upgraded one year ago, with TJM springs (KINGS) and Bilsteins

Front 795mm
Rear 820mm

[samo]

its rides a little firmer than standard but thats to be expected and i have gxl alloys runnin dueler 694s

[lc120_man]

installed ironman lift front before lift 745mm
front after lift 800mm
rear before lift 775mm
rear after lift 840mm
thats with 130ltrs of fuel on board.

Samo,

I noticed you got Gx model... Do you have standard toyota 17x7.5jj rims on yours?

Also we'll need to check the measurements again in about a month time once a suspension has settled...

[Justo]

Just checked the measurements.

Front - 760mm on 2" lift standard rate King Springs with all the gear listed below.

Rear - 765mm on Normal/medium setting.
- 805mm on High setting.

[xvprado]

07 D4D
Bilstein/Lovells and polyair at 5psi
Front, steel bar, winch, dual batteries, tjm bashplate 780mm
Rear, drawers, fridge, junk, full fuel 830mm

[Chippy]

Sweeeeet. That's come up with some nice numbers.

What's it ride like ??

Cheers
Chippy