Toyota Prado 120 Offset

[AntSat Lurker Find all posts View Profile Close AntSat]

Hello,

I would like to place the wheels more outside than stock meaning a little before the limit of the wheel arch. Does anyone knows the offset of the rim to do it?
Any pictures. If I'm not mistaken the stock offset it's +30 mm.

Thanks a lot.

[Steve-Kylie 120 Junior Member Find all posts View Profile Close Steve-Kylie 120]

Closer you go towards 0 offset the further the wheel will go out.

Stock 120 wheels are +30mm as you say i believe to be true.

150 wheels are from memory +15 or +20 i forget now. Either way they move the wheel face out 15-10mm as you require.

[mjrandom Out of control poster! Find all posts View Profile Close mjrandom]

150 wheels are P25 (except the early narrow GX rims). FJ Cruiser are P15.

Quite a few people have fitted FJ rims but please check your local Transport regulations because some states limit any increase in track to 25mm.

[crabman Junior Member Find all posts View Profile Close crabman]

Hi mjrandom.... heaps to read in this thread. I have been reading through and there is some good info in here.
http://www.pradopoint.com.au/showthr...ffset-Database