Tweet
sorry for poor quality. quick fone pix
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG]
-
Prado 120 V6
[COLOR="#FF0000"]Hannibal RR[/COLOR], [COLOR="#008000"]EFS 2" lift[/COLOR], [COLOR="#0000CD"]Rasper custom rocksliders, bashplates & bullbar[/COLOR], [COLOR="#00FF00"]Lynx rear steel bumper[/COLOR], [COLOR="#000000"]Maxxis 762s[/COLOR], [COLOR="#000000"][COLOR="#800000"]CTek 250D[/COLOR][/COLOR],[COLOR="#DAA520"]Diff breathers,[/COLOR] [COLOR="#00FF00"][COLOR="#008000"]Runva 12 000 winch with Dyneema[/COLOR][/COLOR], [B]Ironman snorkel[/B], [COLOR="#FF0000"]200W single row CREE light bar[/COLOR], [COLOR="#696969"][B]Escape Gear interior covers[/B][/COLOR], [COLOR="#0000FF"]rear Aussie Locker[/COLOR] -
OK. A +12 would most likely reduce the rubbing on the mudflaps.Originally posted by Marlan Gounden View PostComment
-
Hi there guys,
I did some light off-roading this past weekend the the tyres faired well. I've solved the front mud flap rub by removing the mud flaps, drilling another hole in each one 2 inches below existing hole and refitting. Will try to take some pics of the mod this weekend. Some more pics of the 33"s.
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
Prado 120 V6
[COLOR="#FF0000"]Hannibal RR[/COLOR], [COLOR="#008000"]EFS 2" lift[/COLOR], [COLOR="#0000CD"]Rasper custom rocksliders, bashplates & bullbar[/COLOR], [COLOR="#00FF00"]Lynx rear steel bumper[/COLOR], [COLOR="#000000"]Maxxis 762s[/COLOR], [COLOR="#000000"][COLOR="#800000"]CTek 250D[/COLOR][/COLOR],[COLOR="#DAA520"]Diff breathers,[/COLOR] [COLOR="#00FF00"][COLOR="#008000"]Runva 12 000 winch with Dyneema[/COLOR][/COLOR], [B]Ironman snorkel[/B], [COLOR="#FF0000"]200W single row CREE light bar[/COLOR], [COLOR="#696969"][B]Escape Gear interior covers[/B][/COLOR], [COLOR="#0000FF"]rear Aussie Locker[/COLOR]Comment
-
so what is the size of your wheel? and what offset?
can you get some pics down the side to show how close they are to the guards?
a mate of mine is selling some 285/70/17s with a 0 offset that are on his hilux, and a few other have fitted the same setup but don't really show pics to see if it hang out of the guards.Comment
-
will try to get some pics up this weekend showing space between tyres and guards. size of wheels are 17x9 with -12mm off setPrado 120 V6
[COLOR="#FF0000"]Hannibal RR[/COLOR], [COLOR="#008000"]EFS 2" lift[/COLOR], [COLOR="#0000CD"]Rasper custom rocksliders, bashplates & bullbar[/COLOR], [COLOR="#00FF00"]Lynx rear steel bumper[/COLOR], [COLOR="#000000"]Maxxis 762s[/COLOR], [COLOR="#000000"][COLOR="#800000"]CTek 250D[/COLOR][/COLOR],[COLOR="#DAA520"]Diff breathers,[/COLOR] [COLOR="#00FF00"][COLOR="#008000"]Runva 12 000 winch with Dyneema[/COLOR][/COLOR], [B]Ironman snorkel[/B], [COLOR="#FF0000"]200W single row CREE light bar[/COLOR], [COLOR="#696969"][B]Escape Gear interior covers[/B][/COLOR], [COLOR="#0000FF"]rear Aussie Locker[/COLOR]Comment
-
I'm running 285 70 17 on +10 offset. Have 2" dobinson lift and have made very minor mods to inner guards to prevent rubbing on full lock. May rub slightly on compression but not to stressed.Comment
-
Photos! Photos! Photos!NOW FOR SALE!!! - 2004 Silver GXL 3lt 4spd Auto - ARB Bullbar, Safari Snorkel, Redarc Dual Battery System, Cooper ST MAXX, Dark Tint, IPF900XS spots, Raised Bilstein/Kings Suspension/Firestone Airbags, Autosafe Cargo Barrier, Sandgrabbers, Rola Roof Rack Stuff, Insect Screen, Dust/Wind Deflectors, Sheepskin/Black Duck Seatcovers, GME TX3510, ARB underbonnet compressor, Allied Hammer Rims, ARB UVP, [url="http://www.pradopoint.com/showthread.php?18043-Rock-sliders-steel-side-steps"]AJ Sliders[/url]Comment
-
I second Madkore's motion! also photos too see how far those 17x9 -10 offsets stick out from the guards, please
Comment
Comment