TJM T13 Bullbar - Stone guard/under tray Photos

[pinko351 Member Find all posts View Profile Close pinko351]

Could someone with a TJM T13 bullbar please post some photos of the Stone guards/under trays that fit under the bullbar to protect the aircon,intercooler and radiator. To help me chose between the ARB Deluxe and TJM T13 bullbar.

I prefer the look of the TJM bar, but salesmen keep pointing out that the TJM bar, leaves the aircon etc exposed. However I've been unable to view a fitted bar to see for myself.

Just to complicate matters either bar will need to allow the fitment of a pair of Lightforce XGTs and rated recovery points.

I welcome anyone's point of view on the matter, but in the end the bar that provides the best protect both from the front and from underneath will get the nod.

Cheers

[1stPrado-White150GXL Junior Member Find all posts View Profile Close 1stPrado-White150GXL]

Hi pinko,

I have the T13 B/Bar. I attached photos a while ago - they may be of some assistance to you.

Scroll down and have a look here: http://www.pradopoint.com/showthread...-TJM-BAR/page8

[Rogerthatv2 Avid PP Poster! Find all posts View Profile Close Rogerthatv2]

There is an underbody guard that comes with the bar for the mid and wing section (3 pieces) so no parts are exposed. I will try and take a better pic later but you can sort of see it here on mine...

[pinko351 Member Find all posts View Profile Close pinko351]

Thanks Guys

Both your Prado's look great and remind me why I keep coming back to the TJM T13.

To put my mine at ease I would appreciate it if you could take the time to photo the under trays.

I'm starting to think that the unprotected comments maybe a calculated miss direction by the salesmen.

Cheers

[Hutch Addicted PP Member Find all posts View Profile Close Hutch]

i have one photo from the show, it is not a good quality shot.

[Rogerthatv2 Avid PP Poster! Find all posts View Profile Close Rogerthatv2]

That is the one you have to buy to replace the oe guard, I will take one in a moment and post it.

[Rogerthatv2 Avid PP Poster! Find all posts View Profile Close Rogerthatv2]

This is it, looks good enough to me plus it has a 5mm thick steel winch mount a few inches about it... I just wish my VX would take that one that Rob just posted as well, not on KDSS vehicles but. One day maybe or fingers crossed ARB might make one.

[Hutch Addicted PP Member Find all posts View Profile Close Hutch]

ARB r working on it apparently, should be released by now.

[pinko351 Member Find all posts View Profile Close pinko351]

Thanks Roger

That's the money shot.

I don't see too much wrong with that.