Tweet
Last friday I dropped in at ARB head office and checked on the side steps for the 150. Was told they are not ready yet, but would be soon and the fitted price was around $1450. This was not colour coded, needless to say I will not be getting the ARB ones this time.
-
[B]White D4D GXL auto Mickey Thompson ATZ 4 rib 265/70 R17, Genuine towbar, OME Suspension, ARB Sahara bar, Safari Snorkel, Icom 440N UHF, Rhino sportz bars, redarc BCDC1240 dual battery system, Drifta drawer setup, headlight upgrade.....more to come....[/B]
My Rig Build [url]http://www.pradopoint.com/showthread.php?24451-Mark-s-White-D4D-GXL[/url] -
Hmmm, I was quoted $950 last week for the steps not coded, including fitting. Might just book that in ASAP considering the above figure.
Also was told the courtesy lighting is not impacted with these steps.Comment
-
Hi was told the same price Criek, that sounds more like the side bars and step price.-----------------------
Daniel
Toyota Prado 150 Series D4D VX Auto Graphite with a 2009 Jayco Hawk Outback
My Rig Build Up - [URL="http://www.pradopoint.com/viewtopic.php?f=38&t=9064"]viewtopic.php?f=38&t=9064[/URL]Comment
-
Does anyone know what sort of bar this is?? Exactly what im after!!Originally posted by Brains View PostHere are some photos of the TJM steel side steps. TJM Brendale is offering 10% off the RRP of $750 of these steps to Pradopoint members when they are released early next year.
[SIZE=2]SBIDDER
2013 Prado GXL Auto - Glacier Wh[/SIZE]iteComment
-
It is the TJM alloy bar it is a T?? Not sure of the number but just ask your local TJM dealer.[b]Rob[/b]
[b]2016 Toyota Hilux SR5 D4D Auto Company Cruiser... [/b].
[url=http://www.pradopoint.com/showthread.php?23866-Hutch-s-2012-150-GXL-V6-petrol-Auto]Hutch's 2012 Build up[/url]
[SIGPIC][/SIGPIC]Comment
-
Awesome, Thanks guys[SIZE=2]SBIDDER
2013 Prado GXL Auto - Glacier Wh[/SIZE]iteComment
-
Any update on the ARB prices/availability for the VX ?2012 Pearl White VX, 3.0 Litre D4D Auto, Wynnum 2.5T Tow Bar, OME Lift, TJM Airtech snorkle, TJM diff breathers, Redarc EBRH, Projecta DBC100K, Lightforce XGT, EBC Nudge bar, Custom Recovery Points, TG150, ARB compressor, Pioneer Platform, Kaymar #K7123 /CDQ2195, 697 A/T's, Tin's DC trans cooler, MaxTrax on TraxRax, TJM DBS, Piranha Tray...Comment
-
-----------------------
Daniel
Toyota Prado 150 Series D4D VX Auto Graphite with a 2009 Jayco Hawk Outback
My Rig Build Up - [URL="http://www.pradopoint.com/viewtopic.php?f=38&t=9064"]viewtopic.php?f=38&t=9064[/URL]Comment
-
Excellent, thanks Dan. How is the paint holding up at each end near the tyres ?2012 Pearl White VX, 3.0 Litre D4D Auto, Wynnum 2.5T Tow Bar, OME Lift, TJM Airtech snorkle, TJM diff breathers, Redarc EBRH, Projecta DBC100K, Lightforce XGT, EBC Nudge bar, Custom Recovery Points, TG150, ARB compressor, Pioneer Platform, Kaymar #K7123 /CDQ2195, 697 A/T's, Tin's DC trans cooler, MaxTrax on TraxRax, TJM DBS, Piranha Tray...Comment
-
No issues at all mate, they tuck up inside the sill so don't expect it to be an issue.-----------------------
Daniel
Toyota Prado 150 Series D4D VX Auto Graphite with a 2009 Jayco Hawk Outback
My Rig Build Up - [URL="http://www.pradopoint.com/viewtopic.php?f=38&t=9064"]viewtopic.php?f=38&t=9064[/URL]Comment
-
Bought the TJM steel side steps last week through my local 4wd shop.
They look really good and are easy to fit except............!!
The drivers side fits perfectly but the passenger side step actually touches the underneath off the car sill!!
After a lot of measuring, from me, and a lot of phone calls and emails from my local supplier TJM have asked my local to see if they can 'modify' the step to fit!!
If anyone hasn't seen the steps, there is a rectangle spacer that bolts between the nut and step mount kind of like a washer in effect.
Anyway, I ended up putting this rectangle spacer between the step mount and chassis mount where they bolt together ( through frustration/desperation ), and hey presto it made the step almost fit perfect!!
I rang my local and told them who rang TJM who contacted their engineers who said the spacer was [B]meant [B] to be used for adjusting the fitting of the steps!!
Mind you this is not mentioned in the fitting instructions and one of the first things the TJM rep asked my local was to make sure the spacer [B]wasn't[B] bolted inbetween the two mounts!!!
Basically I was Interested to know if anyone else has experienced this?Comment
-
I got the steps, but fitted a TJM so no issues.[b]Rob[/b]
[b]2016 Toyota Hilux SR5 D4D Auto Company Cruiser... [/b].
[url=http://www.pradopoint.com/showthread.php?23866-Hutch-s-2012-150-GXL-V6-petrol-Auto]Hutch's 2012 Build up[/url]
[SIGPIC][/SIGPIC]Comment
-
Pete I just checked mine (D4D) and the washers are just that, not spacers. The inner edge of the step tucks up neatly beside the sill. To fit the spacer between the two parts of the mount would put the inner edge outside the sill.
I will try to get a pic on the phone, otherwise I can do a proper job tomorrow.My 150 build - http://www.pradopoint.com/showthread.php?27423-A-Random-approach-to-a-Bluestorm-150-GXL-D4D-automaticComment
-
Ok thanks hopefully the next post down will be the photos I have taken!! lolOriginally posted by mjrandom View PostComment
Comment