Tweet
I wonder if the last deal of $250 for the middle row is still available?
-
-
I'm in for front seats and middle row - no need for rears... Can we still specify colour?
Thanks for sorting this, was about to buy some anyway!Prado 150 D4D AUTO GXL with ARB Deluxe Winchbar, Brains' TG150 Transfer Case Actuator Guard, Bilstein/Ridepro 50mm Lift, Safari Snorkel, D697 265/65/17 LTs, Dual Battery Setup with REDARC Controller, REDARC Tow Pro, Toyota Tow Bar, Maxtrax - towing a Camprite TL8s fitted with GXL wheels and D697s.Comment
-
I'm in for Tailor made middle row covers plus head rests.[SIZE=1]2010 150 GXL Ebony Diesel | ARB Delux Bar | ARB Bashplates | GME 3450 UHF | Bilstein/Dobinson lift | SA LED Lighting 185W Spotties | Bridgestone D697LT | Wet Seat covers | LeighW's Voltage booster | Tin75 Pet barrier | 3D Mats'n'boot protector | Onboard ARB CKMA12 Compressor | Rhino Pioneer Platform | Roadsafe Recovery Points | Airtec Snorkel[/SIZE]Comment
-
For anyone needing to protect the back of their middle row seats you could do like I did and hang some rubber from bunnings down the back. I used some tassie oak moulding at the top so the dyneema cord didn't tear thru the rubber. Then run the cord around head rests.Comment
-
Interested in universal cover combo, in black with black stitches.
I think I've read before, just to double check - anyone used these with leather seats? Any issues?2013 ZR in Crystal Pearl With Bits From ARB Catalogue.Comment
-
Hi All,
I have finalised this deal over on the FJ forum, but will wait a few more days for the Pradopoint members, due to the late posting of the deal over here. I have PM'd the couple of people that showed interest here and am waiting on their replies. If anyone else is interested in getting these great seat covers for their pride and joy, PM me with colour preferences and contact details asap, as I will close this deal on Wed 19th.
cheers,
DavidDavid
2013 FJ Cruiser
265/75r17 Cooper ST Maxx, Rear locker/A-Trac/Crawl
Losi Comp Crawler for the really rough stuff
Comment
-
I've got neoprene on leather seats and have no dramas at all, when I pull them off to wash em there's no damage to the leather at all and they sit where they're supposed to and don't slide around on the leather either.Originally posted by fatty boy View Post
I'd say go for it.
Cheers
JamesComment
-
PM sent David, cheers[SIZE=1]2010 150 GXL Ebony Diesel | ARB Delux Bar | ARB Bashplates | GME 3450 UHF | Bilstein/Dobinson lift | SA LED Lighting 185W Spotties | Bridgestone D697LT | Wet Seat covers | LeighW's Voltage booster | Tin75 Pet barrier | 3D Mats'n'boot protector | Onboard ARB CKMA12 Compressor | Rhino Pioneer Platform | Roadsafe Recovery Points | Airtec Snorkel[/SIZE]Comment
-
Arrived and fitted today. Quite neat, took a little while to fit though.
Photo is several stitched together, so a bit distorted.
Thanks Birdman for arranging.
[SIZE=1]2010 150 GXL Ebony Diesel | ARB Delux Bar | ARB Bashplates | GME 3450 UHF | Bilstein/Dobinson lift | SA LED Lighting 185W Spotties | Bridgestone D697LT | Wet Seat covers | LeighW's Voltage booster | Tin75 Pet barrier | 3D Mats'n'boot protector | Onboard ARB CKMA12 Compressor | Rhino Pioneer Platform | Roadsafe Recovery Points | Airtec Snorkel[/SIZE]Comment
-
Got them a few weeks back and I've been sick and didn't get a chance to look.
Like the material and looks good. Reading the instructions - I need 1" hole punch as head rest holes aren't pre-cut. I don't have a hole punch, can I just use scissor to cut it?2013 ZR in Crystal Pearl With Bits From ARB Catalogue.Comment
-
That's the reason I went the Supertrim, they have the holes pre cut and stitched.Originally posted by fatty boy View Post
The reason they want you to use a punch is so it's a nice round hole which is less likely to tear more, where as a cut has a tendency to keep on tearing along that line if stretched or pulled.
Cheers
JamesComment
-
You can make one (wad punch) if you carefully grind or file a chamfer on some pipe. Good enough for a dozen holes. Bunnys should sell copper or steel pipe in short lengths for not much if you don't have anything suitable.My 150 build - http://www.pradopoint.com/showthread.php?27423-A-Random-approach-to-a-Bluestorm-150-GXL-D4D-automaticComment
-
I've had them before, great for beach/swimming trips & your worried bout getting your seats wet.
What I found is they don't breath, in hot weather you sweat your ass off, mainly wet back.
I much prefer the comfort of quality seats without covers, have found most seats can handle a fair bit of getting Wet/damp & dry out fine.
It's easy to throw a towel over the seat if its saltwater, like at a boat ramp, where your str8 off the ski, into the car.
But usually you can dry off enough b4 you get in.
Another accessory, enjoy them if you go for it.Comment
-
Thanks guys.
If I had known, what i know now, I wouldn't have chosen these
. Even with group buy, the difference is ~40/50 bucks. People like me, who aren't handy man - needs to stick with ready-made stuffs. lol. Will go and check out bunnings/masters/autocheap to see whether I can get one cheap.
I've got leather seats, but want something to protect them, as I didn't look after last one, it got torn up on the side of the seat, where the most contact point with the seat-belt.2013 ZR in Crystal Pearl With Bits From ARB Catalogue.Comment
-
Folding the material in half and then carefully cutting a semi-circle should do the trick.Comment
Comment