ARB Sahara Bar with Lightforce Genesis HID

[braddo Senior Member Find all posts View Profile Close braddo]

Ozzygs
Here is my 150 with saraha bar and Genesis lights. I opted to have them place in the centre as the fellow installing them indicated if I wasn't getting a winch(which I am Not) them this was the best postion to get a frim footing. The genesis has a loarge foorprint and won't lie flat over the exisiting holes with the cover plate for the winch. I like the look.
Cheers Ken

That's a nice looking rig for a 150!

[KJA Member Find all posts View Profile Close KJA]

Thanks Braddo. Its getting there slowly
Ken

[ozzygs Junior Member Find all posts View Profile Close ozzygs]

Thanks for the pic, looks great.I would personally like the lights spaced further apart so I may have to have some spacers made.
Got any pics from the side so I can see the amount of room at the top of the light.
Cheers

Ozzygs
Here is my 150 with saraha bar and Genesis lights. I opted to have them place in the centre as the fellow installing them indicated if I wasn't getting a winch(which I am Not) them this was the best postion to get a frim footing. The genesis has a loarge foorprint and won't lie flat over the exisiting holes with the cover plate for the winch. I like the look.
Cheers Ken

[Craigo72 Junior Member Find all posts View Profile Close Craigo72]

I hope this photo up load works for you. First time I've tried. Fingers crossed.

[Craigo72 Junior Member Find all posts View Profile Close Craigo72]

Side view.

[ozzygs Junior Member Find all posts View Profile Close ozzygs]

Thanks Craigo72
pics come out well, that's just what I was looking for. Looks tight fit but appears you can fully adjust them so that all good.
Thanks Again

I hope this photo up load works for you. First time I've tried. Fingers crossed.

[Craigo72 Junior Member Find all posts View Profile Close Craigo72]

No problems at all, happy to assist. They are actually a really good fit, because of the position of the holes and the shape of the back of the light they fit very neatly, but still with plenty of room so they have no chance of hitting the alloy tube.

[vinnie72 Lurker Find all posts View Profile Close vinnie72]

I am considering the genisis also, to go on the ARBdeluxe bull bar. Which store in Perth?

[ozzygs Junior Member Find all posts View Profile Close ozzygs]

Well my New Rig is finally only 4 weeks away, so I have ordered my Sahara Bar, 50W Genesis Lights and the Dual Battery setup. Cant Wait.

[Richoson Avid PP Poster! Find all posts View Profile Close Richoson]

I like how Craig has spread the lights apart as this would still allow good airflow into the centre of the radiator.

Last trip to the Simpson Desert we had two vehicles in our convoy with large spotties that kept overheating.

It wasn't until a few quite bevies around the campfire that we realized the airflow was restricted moved the light on one vehicle the next day and problem solved, did the other vehicle (still overheated the test day) that night and it was also good. Food for thought.

See ya on the tracks, Richo.


Sent from Richos iPhone using Tapatalk

[sbclover Member Find all posts View Profile Close sbclover]

no problems over heating with my sahara bar with 240 xgt's ( no center loop) towing 2.5 ton.....

[rwo Advanced Member Find all posts View Profile Close rwo]

Side view.

Just wondering if you would be able to post a full view of the car showing the bar, I am still tossing up between a sahara or deluxe bar on a white GXL, there is plenty of pics of white deluxe bars but hardly any white sahara bars.

Thanks heaps!

[Disco4 Member Find all posts View Profile Close Disco4]

While it has been established that the Lightforce Genesis fit the Sahara Bar does anyone know if the XGT's fit?

[sbclover Member Find all posts View Profile Close sbclover]

I have a sahara bar without the loop and have XGT's fitted and by the looks they wouldn't fit with the loop and protruding forward of the bar.

Sean
ps. the loop is only held on by 2 bolts so only cosmetic