Volunteer for 150 Series TrekTable

[Trektable Lurker Find all posts View Profile Close Trektable]

Hi Guys,

Drawers: The table protrudes approx 18mm so provided you have a gap greater than that between the closed door and your drawers, you will be fine.

Rear Handle Access: I understand the issue but cutouts need to be avoided from a manufacturing and finish perspective. As you said, no worse than a cargo barrier. You can always unclip the table and partially open it to get to the handle if really required.

Protection: Yes, this is a great feature. I dunno what they did but the Toyota plastic changed when they introduced the 120 series and even slight marks show up like dog's testes. The table stops the rear door getting scratched all the time. My own car cops a beating but the table takes it & doesn't show the marks at all.

Cheers

Andrew

[allanjennison Lurker Find all posts View Profile Close allanjennison]

Hi Everyone
I was the lucky recipient of Andrew's test table which was shown in his photos.
I can vouch for the complexity in getting it to fit right because of the floor height and curve in the rear door. It took five visits to get it properly sorted but the quality of the table and end result is excellent.
The rear handle access concern that some have expressed is not an issue as there is sufficient give in the shock cords holding the table against the door to use the handle to easily open the door.
Cheers

[gronk Lurker Find all posts View Profile Close gronk]

nice, I am interested in part for protection of the rear door and because a table is always handy.
What is the approx load capacity?
I would order one right now, but I want to fit my black widow draw system from the previous 4wd and not sure if it will fit?
here is some pics of the black widow draws in the 150 prado
http://www.bwidow.com.au/vehicles/ToyotaPrado150.htm

I'm interested in the load capacity question and specifically whether the table is suitable for the BW drawer system. Just had a look at mine and think it will probably foul on the drawer handles.

Anyone got any input on this?

[outback7 Banned Find all posts View Profile Close outback7]

Hi Guys,

Drawers: The table protrudes approx 18mm so provided you have a gap greater than that between the closed door and your drawers, you will be fine.

Rear Handle Access: I understand the issue but cutouts need to be avoided from a manufacturing and finish perspective. As you said, no worse than a cargo barrier. You can always unclip the table and partially open it to get to the handle if really required.

Protection: Yes, this is a great feature. I dunno what they did but the Toyota plastic changed when they introduced the 120 series and even slight marks show up like dog's testes. The table stops the rear door getting scratched all the time. My own car cops a beating but the table takes it & doesn't show the marks at all.

Cheers

Andrew

Hi Andrew.....Do fit the table? I also have outback drawers. How long does it take to fit?

[gumboot Avid PP Poster! Find all posts View Profile Close gumboot]

I'm interested in the load capacity question and specifically whether the table is suitable for the BW drawer system. Just had a look at mine and think it will probably foul on the drawer handles.

Anyone got any input on this?

Gronk,
I know it is 150 quesiton but for what it is worth I have the black widow drawers in my 120 and a Trektable fits.
Cheers
Robert