I thought that the roof rails can support 80kg??
Announcement
Collapse
No announcement yet.
Rhino Rack Pioneer Tray - which size did you buy and why?
Collapse
X
-
So whats the limit of you remove the rails and install 3 cross bars?[SIZE=1]2010 150 GXL Ebony Diesel | ARB Delux Bar | ARB Bashplates | GME 3450 UHF | Bilstein/Dobinson lift | SA LED Lighting 185W Spotties | Bridgestone D697LT | Wet Seat covers | LeighW's Voltage booster | Tin75 Pet barrier | 3D Mats'n'boot protector | Onboard ARB CKMA12 Compressor | Rhino Pioneer Platform | Roadsafe Recovery Points | Airtec Snorkel[/SIZE]
Comment
-
Originally posted by amts View Post3 HD cross bars weigh 7.5kg. So you are left with 92.5kg.
Comment
-
I went with the shorter 1528mm one and couldn't be happier. I mainly use it for surfboards and most of the time could get away with just rails but when I hit the beach I like to have the sand tracks on the roof as well. I'm hoping there will also be room for a solar panel at a later date. The boards fit really well on the shorter rack and the only pain was having to source a set of rails as I've gone with the GX model and the rails are needed for this platform.
Comment
-
I have the shorter tray on the factory rails, works well. I carry a half size rhino luggage bag, all the fishing rods, camping chairs, tent, awning poles and gas cylinder up there no problems. I have no intention of getting a rooftop tent so I didn't need the larger one.2011 Upgrade V6 GXL Graphite, Optima Yellowtop/Redarc Dual Battery setup, Dobinsons/Bilsteins 2inch Lift, Rhino Pioneer SXB Tray, Foxwing Awning/Tagalong
Comment
-
Originally posted by fido666 View PostMy Toyota bars are exactly the same as the Rhino Vortex SX bars supplied with the SXB platform, have already checked this with the roof rack place. The SX legs can be bought via Toyota Spare parts for around $50 if you need them, Rhino charge $130 LOL.Prado 150 D4D AUTO GXL with ARB Deluxe Winchbar, Brains' TG150 Transfer Case Actuator Guard, Bilstein/Ridepro 50mm Lift, Safari Snorkel, D697 265/65/17 LTs, Dual Battery Setup with REDARC Controller, REDARC Tow Pro, Toyota Tow Bar, Maxtrax - towing a Camprite TL8s fitted with GXL wheels and D697s.
Comment
-
Originally posted by foxpro View PostThat is including the feet, yes? I have the HD bars on currently and the huge Rhino 42107B is blocking the view out of the patio door atm. That has a net weight of 12kg printed on the box. So 100 - 12 - maybe 4kg for the feet leaves a payload of about 84kg. That would still be enough for the 71kg three person roof tent I'm targeting. I'm just not sure if it is really wise to put nearly 100kg on such a high platform.
Comment
-
-
Is it possible to fit any of the slightly wider models to a Prado 150? Eg is see there is a model 42103B that is 1928 x 1376, which is 140mm wider than the "recommended" 1236mm that shows up on the website as being compatible with the Prado 150. But is it possible to fit these wider models? I ask because I'm looking at occasionally carrying a lightweight car topper dinghy that is very slightly wider than 1236mm. Also, is the positioning of this platforms "set"? IE is there any flexibility in the fore/aft placement as I need this to be located aft to slide the boat on from the rear. The Pioneer Roller looks handy to assist with this plan.Prado 150 D4D AUTO GXL with ARB Deluxe Winchbar, Brains' TG150 Transfer Case Actuator Guard, Bilstein/Ridepro 50mm Lift, Safari Snorkel, D697 265/65/17 LTs, Dual Battery Setup with REDARC Controller, REDARC Tow Pro, Toyota Tow Bar, Maxtrax - towing a Camprite TL8s fitted with GXL wheels and D697s.
Comment
-
Rhino Rack Pioneer Tray - which size did you buy and why?
Width shouldnt be a problem, my feet attach to the 3 cross bars not the frame so assuming these are common to all platforms it would work. I fitted a 45107 Rack to mine which lines up pretty well where the roof ends at the rear door. I could move its position for or aft by re-drilling the mounting locations on the frame and moving the cross bars.
Cheers
Sent from my iGizmo using Tapatalk2014 VX D4D. Dobinson 2 inch lift. TJM T3 Bullbar. rhino platform. TraxRax. Maxtrax. Dual batteries. GME TX3450.
Setup to tow Crusader Muskateer caravan
Comment
-
Cheers, Ian.Prado 150 D4D AUTO GXL with ARB Deluxe Winchbar, Brains' TG150 Transfer Case Actuator Guard, Bilstein/Ridepro 50mm Lift, Safari Snorkel, D697 265/65/17 LTs, Dual Battery Setup with REDARC Controller, REDARC Tow Pro, Toyota Tow Bar, Maxtrax - towing a Camprite TL8s fitted with GXL wheels and D697s.
Comment
-
They do leave a bit of a flat mark on the paint but a quick hit with some polish completely removed the marks on the bro in laws 150, the feet had been fitted for 4yrs and we took them off 3mths ago.[LEFT]Silver 150 Facelift
TJM Bullbar, Lightforce Genisis Spots, Dual Battery System with bits from everyone, Powerful 4x4 slider/steps, Kaymar rear bar, "Genuine" Roof Racks, MSA Seatcovers, Dashmat, Tint, LED Interior Globes, Bridgestone D697s [/LEFT]
Comment
Comment