TJM T13 bullbar cost in Perth

[Ellwood Find all posts View Profile Close Ellwood]

Hi guys was just quoted a price if $2450 for a TJM colour coded bull bar installed in Perth and was wondering if this price sounds right have seen some posts on here talking about $1900 installed would welcome any ones comments cheers

[Hutch Addicted PP Member Find all posts View Profile Close Hutch]

1900 might be without colour code 2250 was last price I heard with the lot.

Hutch- Prado 150 with some TJM Kit.

[SuperDavid Member Find all posts View Profile Close SuperDavid]

I paid $1700 Fitted and $350 for the colour coding. = $2050

But I can't in all honesty recommend tjm perth.
They scratched my car in several places and it took several trips to get the suspension set up correctly (measurement errors by their fitters, fitters not listening to what the boss told them to do.)
They earthed the dual batteries back to the battery earth and didnt solder any of the joins in the dual battery system. ARB spend an hour of their time re wiring to fix the voltage drop.
They are really nice people but I dont feel like their fitters are the best.

[Danda Senior Member Find all posts View Profile Close Danda]

Hi dont know if youv'e got your heart set on color coded but my mate talked me out of that and I went for "hammertone" and so glad I did it looks great never needs polishing and gives a unique look to the Prado, got mine at Sports Range 4x4 (google thier website) at Wangara a bit of a trot but they loan you a car for the day and cost was about a grand, hope this helps,
Dave

[Hutch Addicted PP Member Find all posts View Profile Close Hutch]

$1400 for a colour coded bar is un heard of.... that would not even be cost.

[Ellwood Find all posts View Profile Close Ellwood]

Thanks guys I though it was a bit steep, really have my heart set on a TJM just love the look but the price is over the top and no negotiation either ! Wish there was some other TJM distributors over here and then we would have a little competition. I might just have to go the standard black won't look as good on a graphite but will do the job! and the $400 saved form colour coding will pay for better tyres or an awning.

[Ellwood Find all posts View Profile Close Ellwood]

Hi SuperDrive when did you pay $1050 for the bullbar ? Was it in the last 12 months or was it form a show special, that was my other thought to wait till the next 4x4 show and see if there is a discount but $150 for a TJM sounds really cheap

[SuperDavid Member Find all posts View Profile Close SuperDavid]

Hi SuperDrive when did you pay $1050 for the bullbar ? Was it in the last 12 months or was it form a show special, that was my other thought to wait till the next 4x4 show and see if there is a discount but $150 for a TJM sounds really cheap

Sorry I mis typed the number!!! it was $1700. It was $2050 I meant to type. $1700 for the bar fitted and $350 colour coding = $2050
That $1700 I paid was October last year, but I did have several things done at once. Dual batteries, spotties, suspension and snorkel. So I did get a slightly cheaper price compared to just getting one job done.

I like the TJM people and I like the TJM gear (the Bar and the airtech snokel look great, better than ARB in my opinion), its only the fitters I have a problem with, and in Perth there really is just the one shop.

If I had my time again I would probably get the ARB gear, I really am disapointed with all the issues that came with TJM.

[Hutch Addicted PP Member Find all posts View Profile Close Hutch]

A lot of shops will fit other brands if that is what I like. U could get TJM fitted elsewhere I am sure.

Hutch- Prado 150 with some TJM Kit.

[uncle porky Lurker Find all posts View Profile Close uncle porky]

Guys
I had TJM perth install a colour coded t3 bar ,under body protection, 9500 lb winch, airtec snorkel ,The 2 inch xgs lift kit and they installed my tow bar.
In the deal they threw in a large recovery kit and a rino rack chair.
There was no issues with the install scratches ect; (mabee a new installer )
This was just before xmas . We went to Kalbarri at Christmas and I used all this gear most days with no issues.
Kev
P.S. The price quoted does sound a little high . I can't find the receipt but for all the work I had done it was about 5900

[mattyup Lurker Find all posts View Profile Close mattyup]

Hi. I just had dealings with both arb and tjm last week. Arb ome 2" lift and safari snorkel fitted at canning vale store. Great service, professional and knowledgable. My only complaint is a couple of small gaps around snorkel to panel. I'm going to ask about them when I go back for the 500k check. They gave me an arb bash plate set for $400 which I have fitted myself. They were also negotiable on cost a little too. Tjm were helpful and I am happy with the t13 bull bar (black) they fitted but they wouldn't budge on price ( I suppose I was just getting one thing though) and I'm a bit suss on the wiring of the led indicators/fog lights, looks a bit untidy. My indicators go twice as fast as they used to as well (I'm going back when I'm up there this week to sort it). I paid $2150 for the t13 black fitted, a bit steep but it looks great and is different from every other arb prado in wa

[Mattyzvx Junior Member Find all posts View Profile Close Mattyzvx]

Hi guys,

2 weeks ago I got a TJM T13 bar fitted( just stock black) + airtec snorkel and they fitted my Tigerz 11 12000lbs winch for free at the same tme total cost was $2700, and I found the service to be pretty good.

[sk33tr Lurker Find all posts View Profile Close sk33tr]

Has any one got any pics please?