Originally posted by Sludge
View Post
Announcement
Collapse
No announcement yet.
150 facelift MY14 bullbar picture gallery
Collapse
This is a sticky topic.
X
X
-
A mate went to pick up his new Prado today, his new TJM Outback bar for the 150 2.8 came pre drilled with parking sensor holes and looks absolutely terrible. And there no caps for them either. Its a shame the bulbar already had a scratch on it and was not fitted very well at all.(an Inch to the left...) Apparently they all come like that now. If you are going the tjm outback bullbar check for the holes as none of their pictures on the website show them.
Comment
-
Originally posted by mrwinta View PostMy AFN in silver.... Not too happy with the fit for the price of them so some spacers are being sent to the Dealer where it was fitted- fingers crossed it will look better... if not some custom brush bars might disguise it a bit...
1st go at posting pictures so hopefully you can see them:
Cheers
Brad2016 [B][I][COLOR="#696969"]GRAPHITE[/COLOR][/I][/B] GXL TD 2.8, ARB Deluxe Winch Bar, 285/65/18, Outback Solutions Drawers, Safari Snorkel, Hayman Reese HD Towbar, Firestone Coilrite Airbags, Bilstein & Dobinson lift, AMTS rear wheel spacer, Redarc Tow Pro Elite, Rhino Pioneer Platform (2128x1236mm) with more to come.
Comment
-
Originally posted by Andyfive View PostA mate went to pick up his new Prado today, his new TJM Outback bar for the 150 2.8 came pre drilled with parking sensor holes and looks absolutely terrible. And there no caps for them either. Its a shame the bulbar already had a scratch on it and was not fitted very well at all.(an Inch to the left...) Apparently they all come like that now. If you are going the tjm outback bullbar check for the holes as none of their pictures on the website show them.
Maybe it only needs to be adjusted.
Comment
-
Originally posted by Andyfive View PostA mate went to pick up his new Prado today, his new TJM Outback bar for the 150 2.8 came pre drilled with parking sensor holes and looks absolutely terrible. And there no caps for them either. Its a shame the bulbar already had a scratch on it and was not fitted very well at all.(an Inch to the left...) Apparently they all come like that now. If you are going the tjm outback bullbar check for the holes as none of their pictures on the website show them.
Except for the crappy install... The parking sensor holes is an easy fix.... Happened to me also.
I now have front parking sensors which I installed on a saturday and cost me $23 on fleabay... (im happy to share what I bought - need a specific size sensor)
Works like a charms when parking in the city... Just make sure you get one which allows you to switch off the buzzer mode.
And if you cannot be bothered to have the full sensor, buy the kit and just pop in the sensors (cut off the wires if you wish)
Comment
-
Originally posted by jaco150 View PostI still am a firm believer that the TJM bar looks far better on the MY14+Facelift than the ARB one (who could not be bothered to update their design for such an expensive bar)
The sensor holes really makes no difference in tjm bar - easiest fix ever.
Comment
-
Originally posted by jaco150 View PostI still am a firm believer that the TJM bar looks far better on the MY14+Facelift than the ARB one (who could not be bothered to update their design for such an expensive bar)
The sensor holes really makes no difference in tjm bar - easiest fix ever.
Comment
-
Originally posted by brock05 View PostDid you have any luck getting a better fit with your bar? I would like to go AFN bar but would not be happy with that fit. If they want the bar to be integrated it needs to match to panels perfectly IMO.
Cheers
Brad
I don't have any photo's to show you and I am away for 6 weeks with work. I will ask the wife to send me a few and I will try to upload them.
Cheers
Winta
Comment
-
Originally posted by mrwinta View PostHi Brad, the guys who did the instal made a stirling effort to get it very well matched to the panels. It does now fit evenly and looks awesome with the color match, ARB UVP and the Fyrlyts but if you look from the rear you can still see it does not match the profile of the wing below the light but as its the same on both sides it doesn't really matter. If I was being fussy I could complain about the spot welding on the two uprights but all in all I am very happy with it.
I don't have any photo's to show you and I am away for 6 weeks with work. I will ask the wife to send me a few and I will try to upload them.
Cheers
Winta
Cheers
Brad2016 [B][I][COLOR="#696969"]GRAPHITE[/COLOR][/I][/B] GXL TD 2.8, ARB Deluxe Winch Bar, 285/65/18, Outback Solutions Drawers, Safari Snorkel, Hayman Reese HD Towbar, Firestone Coilrite Airbags, Bilstein & Dobinson lift, AMTS rear wheel spacer, Redarc Tow Pro Elite, Rhino Pioneer Platform (2128x1236mm) with more to come.
Comment
-
What sort of prices are people paying for TJM outback bar and ARB deluxe bars in Sydney? [both in black] I appear to be getting quoted around $2550 for the TJM [ $300 less in current sale] and $2250 for the ARB, both fitted. Snorkels are about $740 for Safari and TJM [ less $75 in current sale]. these prices appear to be at or very close to RRP s
Comment
Comment