fridge slide mounting

[barnaby Lurker Find all posts View Profile Close barnaby]

I am looking for the post where some one mounted a fridge slide in the back of a 150 with the seats still in place thankyou

[Fred63 Advanced Member Find all posts View Profile Close Fred63]

I am looking for the post where some one mounted a fridge slide in the back of a 150 with the seats still in place thankyou

make a false floor
remove the tie down points.
Get longer 6mm bolts to bolt the false floor down.
Mount the slide on the false floor.

Only 4 bolts so pretty quick to remove if you need to use the 3rd row seats.

[barnaby Lurker Find all posts View Profile Close barnaby]

make a false floor
remove the tie down points.
Get longer 6mm bolts to bolt the false floor down.
Mount the slide on the false floor.

Only 4 bolts so pretty quick to remove if you need to use the 3rd row seats.

thank you

[fido666 Banned Find all posts View Profile Close fido666]

Have a look at my build thread from about this post on :- http://www.pradopoint.com/showthread...l=1#post459442

Might give you some pointers.

[trsmith Member Find all posts View Profile Close trsmith]

thank you

instructions on how to do this here
http://www.pradopoint.com/showthread...ons-(MY14-GXL)

[fido666 Banned Find all posts View Profile Close fido666]

instructions on how to do this here
http://www.pradopoint.com/showthread...ons-(MY14-GXL)

Barnaby wants to leave the 3rd row seats in and mount the slide on top of them, that's what I have done in my build. Thanks for the link though, I need to do this to install my drawers now.

[barnaby Lurker Find all posts View Profile Close barnaby]

thanks every one did it to ,there is a bit of movement in the seats when I slide the fridge out .is there any way of supporting the front more

[barnaby Lurker Find all posts View Profile Close barnaby]

now for a radio
which one should I get .how would a good hand held go .