Fitting uhf in 150 series 2011

[Magpie629 Lurker Find all posts View Profile Close Magpie629]

finally getting around to installing a uhf into my prado. I did see a while back a step by step post with pictutes on how to do this but. Unfortunately cannot seem to find it now. Want to hide the uhf behind the facia in the drivers side footwell and use a rj45 pass through. Appreciate any help on how to do this. Regards keith

[nanbar Senior Member Find all posts View Profile Close nanbar]

I mounted my unit behind the horizontal panel under the glove box, this is a better location if you are wiring direct to battery. You will need to cut away some foam material to make it sit in. I purchased the Lightforce RJ45 pass through with fits into one of the switch blanks (see link below). Just make sure you get the prado one with the correct light colour.

https://www.ebay.com.au/itm/LIGHTFOR...-1xV:rk:6f:0

[Magpie629 Lurker Find all posts View Profile Close Magpie629]

Thanks for the suggestion nanbar. I bought the rj45 you mention a couple of weeks ago.

[Bigben Member Find all posts View Profile Close Bigben]

Mine is mounted behind the steering column cowl in foot well & RJ in spare switch location on consol. Handset just next to it.

[money_killer Member Find all posts View Profile Close money_killer]

i got my uhf under the passenger front seat and mic pass's thru centre console via a pass thru cable linked above

[Magpie629 Lurker Find all posts View Profile Close Magpie629]

Thanks for the suggestions everyone. As o am a complete novice at this do you have a step by step guide with pictures i could follow?