Tweet
my prado not here yet but when it does get here will be puting the same bar and colour is the same as yours Kakadaz
-
2011 150 D4D, TJM T13 Bullbar, TJM Airtec Snorkel, TJM Awning, Hayman Reese towbar, BFG all terrains, Hella Spotties ([B]Sold[/B]) -
Its a nice bar and I like the fact it suits the lines of the 150 but is tucked into the car nicely, the ARB bars seem to stick out a long way. I got a price today from TJM of $2375 painted and installed..using existing fog lights and it has provisions for the parking sensors.Originally posted by fourbyfour View Post2010 Kakadu with all the usual stuff.... Build up thread below
[url]http://www.pradopoint.com/showthread.php?21930-Daz-s-2010-Kakadu-is-getting-some-lovin&highlight=daz%27s+kakadu[/url]Comment
-
I was quoted $2410 painted and installed and mine is GXL so no front sensors.2011 150 D4D, TJM T13 Bullbar, TJM Airtec Snorkel, TJM Awning, Hayman Reese towbar, BFG all terrains, Hella Spotties ([B]Sold[/B])Comment
-
Cool I'm happy with that price then.2010 Kakadu with all the usual stuff.... Build up thread below
[url]http://www.pradopoint.com/showthread.php?21930-Daz-s-2010-Kakadu-is-getting-some-lovin&highlight=daz%27s+kakadu[/url]Comment
-
i had same feeling with my 120 grande when my bar was fitted. i played around with suspension settings but was never really happy, then thought i should play with the tyre pressures and that has made it feel like it used to. it was only a small 1-2 psi adjustment up in pressures that did it for me. maybe worth trying?Originally posted by Tezza222z View Post[size=1][color=#990000][b]--> Macarthur District 4WD Club Member <--[/b][/color]
::2005 Black Grande Petrol V6::2 x PP Stickers::ARB Deluxe Winch Bar::IPF Spotties + Fogs:: Dual Battery, ABR DBi120 Isolator & Volt Monitor::ARB Portable Air:: Rear Drawer Unit::Trek Table::WAECO 40Lt::WAECO Raps R12U::AMTS Rear Tyre Spacer::HILUX Washers::UHF::Prodigy P3::Stebel Air Horns:: Inverter::CouplerTec Electronic Rustproofing::OEM Roof Racks, Towbar, Hard Wheel Cover::REAR CAMERA to factory GPS::[/size]Comment
-
I have ordered the TJM T13, colour coded with sensors for $1950 installed with the inserts which I think is standard being they call it 100% bumper replacement. So I am happy with that price, it's a pain that the bar is on back order till the end of this month
Comment
-
Does anyone know what sort of drop the front of the car will have if I fit say a T13 full steel bar? I cant find anyone in Perth willing to lift a Kakadu so any drop is clearance lost.2010 Kakadu with all the usual stuff.... Build up thread below
[url]http://www.pradopoint.com/showthread.php?21930-Daz-s-2010-Kakadu-is-getting-some-lovin&highlight=daz%27s+kakadu[/url]Comment
-
I've just put one on a GXL and the drop was minimal, hardly noticeable. Nothing that a lift won't fix overall. I didn't take measurements as the lift is something I will do very soon after spending the day with Hutch, Richo, Fozzy and Kondo. I needed some extra clearance today.[SIZE=2]Black 2009 150 Series D4D GXL Prado, [B]TG150[/B] Transfer Case & Actuator Guard, TJM T13 bar, TJM 9.5lb Winch, Airtec Snorkel, TJM steel sidesteps and sidebars, TJM Underbody Protection, TJM XGS Gold Suspension, Tinted, ARB Fridge Freezer, Couplertec System, Foxwing Awning, 80AH Dual battery, 8" indash GPS, Wet Seat seatcovers, GME TX3540, TX3110 & TX680, [B][COLOR=#ff6633]Maxtrax[/COLOR][/B], Kaymar Dual Wheel Carrier, Breathers, Federal MT's.[/SIZE]Comment
-
Good to know it didn't drop much unfortunately a lift just isn't possible on mine.Originally posted by Brains View Post2010 Kakadu with all the usual stuff.... Build up thread below
[url]http://www.pradopoint.com/showthread.php?21930-Daz-s-2010-Kakadu-is-getting-some-lovin&highlight=daz%27s+kakadu[/url]Comment
-
Kakadaz, you should ask Pete (Kondo) for his front measurements as he is in a Kakadu with a TJM T13 Steel hanging off of the front...-----------------------
Daniel
Toyota Prado 150 Series D4D VX Auto Graphite with a 2009 Jayco Hawk Outback
My Rig Build Up - [URL="http://www.pradopoint.com/viewtopic.php?f=38&t=9064"]viewtopic.php?f=38&t=9064[/URL]Comment
-
I will do thanks Daniel.Originally posted by Rogerthatv2 View Post2010 Kakadu with all the usual stuff.... Build up thread below
[url]http://www.pradopoint.com/showthread.php?21930-Daz-s-2010-Kakadu-is-getting-some-lovin&highlight=daz%27s+kakadu[/url]Comment
-
Easy done mate, just make sure you get him to do the centre of the wheel to the base of the guard. Pick a clip etc underneath that you can both use as a reference point. I know Pete has new rims on his so if you go centre wheel the measurement will be spot on.Originally posted by KAKADAZ View Post-----------------------
Daniel
Toyota Prado 150 Series D4D VX Auto Graphite with a 2009 Jayco Hawk Outback
My Rig Build Up - [URL="http://www.pradopoint.com/viewtopic.php?f=38&t=9064"]viewtopic.php?f=38&t=9064[/URL]Comment
-
That's a big price difference ($500) for the TJM bar between QLD and WA.[B]Steve[/B]
2010 Silver GXL Prado 150, D4D Auto, with a few non standard bitsComment
-
Just ordered an ARB deluxe bar...fitment in 10 days !
Paul
2011 150 Auto D4D Storm Blue, Mickey Thompson MTZ 265/70/17, ARB Deluxe Bar, OME 2 inch Suspension, Warn XD9000 , Lightforce 240 Blitz, Parkside Towhitch, Sandgrabbers, Rhino racks, Redarc Dual Battery setup, etc...Comment
-
fourbyfour, I was quoted $2250 for my (yet to be obtained!!!) GXL, so might be worth pressuring for a better price. I am in Melb so freight might be an issue. The 4X4 show is coming up in Melb soon so will wait and see if I can do better.Originally posted by fourbyfour View Post
regards
geoffBlue Storm 150 D4D GXL, Toyota Tow Bar, Cheepo floor mats, Tough Dog Springs & Shocks, Colour Coded TJM T13 steel bar, KingOne winch with rope, GME 3440 80 channel uhf. Not allowed to make hole for snorkel - yet..Comment
Comment