The front diff breather is below the fuse box in the engine bay. There is 3 on the gearbox and transfer case, 1 large hose and two smaller hoses. SO based on the video you might want to check the front diff.
When I did mine I put the 2 smaller diameter hoses into one larger hose via T-piece, s I still ended up with 4 as that is how many breather/filters were in the kit.
Aidan
2015 GX Prado 3L Auto, in the process of being fitted out.
One of several threads. As MYT said the white breather is the auto box, the other two are transfer case. Front diff is near the battery/ fuse box and rear diff is on the diff. Nice video except I don't think you will be routing.
Andrew (amts) can you please merge this with the others?
My 150 build - http://www.pradopoint.com/showthread.php?27423-A-Random-approach-to-a-Bluestorm-150-GXL-D4D-automatic
Ahh, you are right. I didn't see that one. I wonder what the white one is for. Have to check that one out. Its extended as well. I will add the front diff now.. Cheers
The front diff breather is below the fuse box in the engine bay. There is 3 on the gearbox and transfer case, 1 large hose and two smaller hoses. SO based on the video you might want to check the front diff.
When I did mine I put the 2 smaller diameter hoses into one larger hose via T-piece, s I still ended up with 4 as that is how many breather/filters were in the kit.
Aidan
I will just tee the front diff one (now I know where it is) into the rear diff one.. If I get a chance I will update the video..
Tee the two 1/8" together if you can but realistically front and rear will be ok too. I made up a bracket for mine with four holes and then realised I needed five so made a new bracket. I think the pics are in one of those two threads I linked. White is auto gearbox.
While there are five to do the gearbox is way easier on the 150 than the 120.
My 150 build - http://www.pradopoint.com/showthread.php?27423-A-Random-approach-to-a-Bluestorm-150-GXL-D4D-automatic
Yeh. I just assumed the White was the front diff. I actually didn't check it. Dumb. I couldn't get a fitting this late, so will tomorrow. I changed/adapted all the hoses to 1/4, so I only need a 1/4 T and a knife and its done.
From a fittings place in Wangara Perth. They are just the same filters they use for Air tools, usually the exhaust , so any Air fittings place will have them also.
I added a link to the first video that points to this second one with the corrections, and also added the fuel tank breather (D4D) extension to the this video for any one interested.
Comment