Oil Catch Can for catching Blow-by....

[Chip It Senior Member Find all posts View Profile Close Chip It]

yep, its easier that way I feel. Just empty on a lazy Sunday afternoon whilst enjoying a beer

[matt150 Avid PP Poster! Find all posts View Profile Close matt150]

Found this today. My new hose is on the way.

http://www.ebay.co.uk/itm/1x-Fuel-Ho.../230885094674?

[Chip It Senior Member Find all posts View Profile Close Chip It]

good find Matt

[matt150 Avid PP Poster! Find all posts View Profile Close matt150]

New hose fitted up.

[Tar Trek Junior Member Find all posts View Profile Close Tar Trek]

Hi there,

A tip for mounting your "Catch Can".

1) Try to mount the can so the top is lower than the outlet from the engine, so the inlet hose runs downhill & any rubbish runs down into the can, not back into the engine when it's turned off.

2) Mount the outlet hose so it runs uphill so the rubbish runs back into the can when the engine is turned off.

Tar Trek.

[mjrandom Out of control poster! Find all posts View Profile Close mjrandom]

Matt what is the OD of that hose?

[derek11 Advanced Member Find all posts View Profile Close derek11]

Mate, talking about hoses, I am having a real drama getting the right hose now. The Purple Pig went broke and was taken over by Powell Industries. I have been trying to get the hose out of them since Christmas.
Does anybody know where I can buy 5/8" SAE30 R6 hose from, fuel hose. Around the 7 to 10 metres, not 150 metres at a time.
Any help in this matter would be appreciated.
The Roo.

Hi Roo,
Got all my hoses from Hose Power, give them a go as they have a range of fuel hose sizes and to what ever length.

Cheers Derek

[matt150 Avid PP Poster! Find all posts View Profile Close matt150]

Matt what is the OD of that hose?

The internal size if the hose is 15mm.

[Chip It Senior Member Find all posts View Profile Close Chip It]

Just so happens that a forum member has these oil catch cans as well.

As cheap as the eBay item mentioned they are not, but also are they not the Cheap Chinese Versions as they ones mentioned by The Roo.

Available from Prado Point Store

[Chip It Senior Member Find all posts View Profile Close Chip It]

Yes I realise. I was reaffirming your statement, which was absolutely correct.

[jeff butler Lurker Find all posts View Profile Close jeff butler]

You can buy 5/8 R6 SAE 100 from ENZED at Brendale ( Southpine Rd) . 1.5M cost me $22.80. 1/2" was $19.45 for 1.5M.
Jeff.

[Johno Junior Member Find all posts View Profile Close Johno]

Matt mr4x4 where did you get your catch can from?

Thanks in advance.


Aaron

[Chip It Senior Member Find all posts View Profile Close Chip It]

You can buy 5/8 R6 SAE 100 from ENZED at Brendale ( Southpine Rd) . 1.5M cost me $22.80. 1/2" was $19.45 for 1.5M.
Jeff.

Thanks for that Jeff

[Chip It Senior Member Find all posts View Profile Close Chip It]

Good price there Roo. Feel free to mention this in my advert in the PP store if you like

[mjrandom Out of control poster! Find all posts View Profile Close mjrandom]

Roo does your hose fit inside the Chip It can (think carefully before you answer!)?