Announcement
Collapse
No announcement yet.
EGR blanking plate to block off or restrict?
Collapse
X
-
Powermaxx from http://bluechemaustralia.com.au/. Extremely knowledgable and helpful guy, they have had good results testing in heavy diesels.
But I have kind of future-proofed my car now if you know what I mean...150 D4D GX with big tyres, TPMS, Tracklander, GME, Safari breathing straw & super soft squishy custom rear springs.
Comment
-
Hi People's. My First Post. Sold 2006 Tundra V8 and now have 150 Prado. Have a DHP chip, 7mm EGR blank and no muffler. Dyno'd on Sunshine Coast at mates workshop over Easter. 168.2KW - 496Nm Torque. Feels like my old Tundra. Thank you guys for your advice to get me here. Ready for touring now without other half winging its too big!!!!
Comment
-
Anyone had any luck with a blanking plate for the 1GD-FTV? Apparently its a different beast and requires a much larger hole and is designed differently to the 1KD engine.
Thanks
DougLast edited by cuda; 27-03-2016, 01:40 AM.2018 150 Series Crystal Pearl Prado VX 2.8l. 2 inch King springs and Bilstein shocks, Airtek TJM snorkel.
Comment
-
I think "Hally" on here has one fitted to his, not sure if he has all the bugs ironed out though.[LEFT]Silver 150 Facelift
TJM Bullbar, Lightforce Genisis Spots, Dual Battery System with bits from everyone, Powerful 4x4 slider/steps, Kaymar rear bar, "Genuine" Roof Racks, MSA Seatcovers, Dashmat, Tint, LED Interior Globes, Bridgestone D697s [/LEFT]
Comment
-
A bloke on another forum says these guys have good stuff, "oil is so clean it is hard to see the oil on the dipstick"
http://www.costeffective.com.au/
I have never used them, has anyone tried them ?
ps: a bit more info, he has friends who do fleet maintenance and they recommended the company to him.Last edited by ozimacca; 28-03-2016, 09:51 AM.
Comment
-
Originally posted by ozimacca View PostA bloke on another forum says these guys have good stuff, "oil is so clean it is hard to see the oil on the dipstick"
http://www.costeffective.com.au/
I have never used them, has anyone tried them ?
Comment
-
Originally posted by cuda View PostAnyone had any luck with a blanking plate for the 1GD-FTV? Apparently its a different beast and requires a much larger hole and is designed differently to the 1KD engine.
Thanks
Doug
Have done a heap of driving over easter and has not got code up onceArb colour code deluxe bar, safari snorkel, lightforce venom HID's, GME uhf remote face, redarc tow pro, redarc bcdc 1240, pioneer platform, 40" curved light bar, dual battery, 3" SS exhaust, EGR mod, trans cooler upgrade, provent catch can, scangauge 2, diesel care secondary fuel filter, Tin's bash plates and actuator gaurd, 2in Bilstien and kings lift,
Comment
-
Originally posted by Hally View PostYes finally got it undercontroll i got my plate from Tin and have had to drill out to 1/2inch (12.7mm)for it not to bring up codes.
Have done a heap of driving over easter and has not got code up once
Thanks2018 150 Series Crystal Pearl Prado VX 2.8l. 2 inch King springs and Bilstein shocks, Airtek TJM snorkel.
Comment
-
Originally posted by Hally View PostYes finally got it undercontroll i got my plate from Tin and have had to drill out to 1/2inch (12.7mm)for it not to bring up codes.
Have done a heap of driving over easter and has not got code up once
Please.
Comment
-
Originally posted by Anth120playdo View PostWhat is the egr pipe diameter before you put the plate in?
Please.
OD is 32mm roughly did it in dark with digital vernier but battery flat😠.
It is thin wall pipe as well and is a peice of piss to put plate in. The hardest part is getting the nuts cracked from factory.Arb colour code deluxe bar, safari snorkel, lightforce venom HID's, GME uhf remote face, redarc tow pro, redarc bcdc 1240, pioneer platform, 40" curved light bar, dual battery, 3" SS exhaust, EGR mod, trans cooler upgrade, provent catch can, scangauge 2, diesel care secondary fuel filter, Tin's bash plates and actuator gaurd, 2in Bilstien and kings lift,
Comment
-
Originally posted by Anth120playdo View PostNo Problamo! Cheers!Arb colour code deluxe bar, safari snorkel, lightforce venom HID's, GME uhf remote face, redarc tow pro, redarc bcdc 1240, pioneer platform, 40" curved light bar, dual battery, 3" SS exhaust, EGR mod, trans cooler upgrade, provent catch can, scangauge 2, diesel care secondary fuel filter, Tin's bash plates and actuator gaurd, 2in Bilstien and kings lift,
Comment
-
Originally posted by Hally View PostWhat you think #### is it even worth the blank with a 12.7mm hole or not going to do shit
I need to plug in & analyse what egr is doing on these.
With dpf the egr could be set to open less.
You see one of the many problems with dpf, Exhaust Gas Recirculation (EGR) system causing incomplete combustion will increase soot loading on dpf.
So I hope they would reduce egr operation.
Need a guineaPIG.
Comment
-
Originally posted by cuda View PostI'll wait a little longer to confirm you have it sussed before I go ahead with it.
ThanksArb colour code deluxe bar, safari snorkel, lightforce venom HID's, GME uhf remote face, redarc tow pro, redarc bcdc 1240, pioneer platform, 40" curved light bar, dual battery, 3" SS exhaust, EGR mod, trans cooler upgrade, provent catch can, scangauge 2, diesel care secondary fuel filter, Tin's bash plates and actuator gaurd, 2in Bilstien and kings lift,
Comment
Comment