Inlet hoses from intercooler

[DG0787 Lurker Find all posts View Profile Close DG0787]

Gday all, been driving around the past couple of days and feels like a power reduction. Popped the bonnet to find these hoses coming off the intercooler appear to have shifted or is this where the hoses are meant to be sitting? Has anyone else had this?

[cfryback Find all posts View Profile Close cfryback]

There is a small hose, as I can see in your first picture. If that hose is off, you go into limp mode. If the clamps are loose and letting in air, you will hear a whistling noise. At least that was my experience when I fit my catch can.


Sent from my iPhone using Tapatalk

[Fossey Lurker Find all posts View Profile Close Fossey]

G'Day DG0787. Just checked under the bonnet of ours which looks much the same as yours. The distance from the machined section of the pipe to the edge of the hose was 21mm.

[Razorback81 Advanced Member Find all posts View Profile Close Razorback81]

that little filter in the top LH side of the first pic needs cleaning now & again as well as the one in the top of the air cleaner
clean those 2 parts when you service and they will run very efficient

[DG0787 Lurker Find all posts View Profile Close DG0787]

that little filter in the top LH side of the first pic needs cleaning now & again as well as the one in the top of the air cleaner
clean those 2 parts when you service and they will run very efficient

No worries.
just use compressed air ya reckon?

[DG0787 Lurker Find all posts View Profile Close DG0787]

G'Day DG0787. Just checked under the bonnet of ours which looks much the same as yours. The distance from the machined section of the pipe to the edge of the hose was 21mm.

Yeah on the safe side im gonna buy 90mm tube and double clamp every hose connection

[Razorback81 Advanced Member Find all posts View Profile Close Razorback81]

No worries.
just use compressed air ya reckon?

brake cleaner on the filter unit & air flow meter cleaner on the air flow meter in the air cleaner !!