Announcement

Collapse
No announcement yet.

Workshop Manual?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    The link is still active SOL, not sure if the seller is any good though.

    Comment


    • #17
      dypcdiver & Ryzz
      I ordered a 120 series manual CD from Auto EPC and has taken over a month still no show, first of May.
      I did not realise that they were in the Ukraine?. I have recieved prompt replys from them when I ask for a report.
      Cheers

      Comment


      • #18
        Originally posted by simcott View Post
        dypcdiver & Ryzz
        I ordered a 120 series manual CD from Auto EPC and has taken over a month still no show, first of May.
        I did not realise that they were in the Ukraine?. I have recieved prompt replys from them when I ask for a report.
        Cheers
        From memory i got a link within hours-days to download an iso. I dont remember having any problems getting it. Mine was the 150 version so i dont know if that changes things...?
        My Rig: 150 GXL D4D, Tough Dog adjustable suspension with 60mm lift, Polyair bags, ARB Winch Bar, Warn Winch with Dynamica Rope, Outback Ideas recovery points, GME UHF, HID Low/High Beam, Lightforce Genesis HID Spots, Dual Battery Setup with rear power outlets, ARB air compressor in engine bay, ~30L Watertank mounted behind fueltank.

        Comment


        • #19
          Ryzz
          Thanks for that I will just sit and wait, I will declare when it arrives, or that it has dawned on me that I have done my dough.

          Comment


          • #20
            Ryzz
            I finally got the cd today after complaining to Autoepc. Last Friday they took over my computer and downloaded the manual probably as you received yours.
            I have a question on how these programmes work. When you open the manual does it need to connect to the net to unlock or source something??
            I will get my computer boffin to explain it to me.
            Unfortunately the timing was a bit bad because my computer died and I got a new one and transferred stuff over to it. Now I have to get used to Win 7.

            Comment


            • #21
              Try this link
              Lots of cool manuals
              http://www.toyota-tech.eu/
              Prado GXL 2012 Charcoal - Drifta Drawers, Cargo Barrier, Sidewinder Dual Battery kit, Ironman Bar, Narva lights, Safari Snorkel, Airbags, TX3350 kit, Waeco CFX65DZ - often seen with Thule 2.2M narrow roof pod and towing 2014 Kimberley Kamper. Could be anywhere!

              Comment


              • #22
                try this http://www.pradopoint.com/showthread...orkshop-manual
                2010 Blue Storm GXL Deisel Auto, HR towbar, uniden UHF, 270/65/17 BFG A/T, Delux ARB bullbar (FITTED), IPF Xtreme Spotties, Safari Snorkel (to come) Sungrabba mats (awesome)

                Comment


                • #23
                  Originally posted by simcott View Post
                  Ryzz
                  I finally got the cd today after complaining to Autoepc. Last Friday they took over my computer and downloaded the manual probably as you received yours.
                  I have a question on how these programmes work. When you open the manual does it need to connect to the net to unlock or source something??
                  I will get my computer boffin to explain it to me.
                  Unfortunately the timing was a bit bad because my computer died and I got a new one and transferred stuff over to it. Now I have to get used to Win 7.
                  Simcott, I didn't see this reply earlier. What is the file name and file extension? Ie pradomanual.iso or something. The dot xxx is the most important part as it tells you what program is needed to open it.
                  My Rig: 150 GXL D4D, Tough Dog adjustable suspension with 60mm lift, Polyair bags, ARB Winch Bar, Warn Winch with Dynamica Rope, Outback Ideas recovery points, GME UHF, HID Low/High Beam, Lightforce Genesis HID Spots, Dual Battery Setup with rear power outlets, ARB air compressor in engine bay, ~30L Watertank mounted behind fueltank.

                  Comment


                  • #24
                    Ryzz
                    Sorry about the long delay but I don't often check the site.
                    I just responded to someone about this today.
                    Sorry I don't know the file name but It is opened with Internet Explorer. When my computer downloaded Windows updates and installed Internet Explorer 11 the autopec manual would not open so we had to uninstall Internet Expl. 11 and put version 7 back in for it to open??

                    Comment


                    • #25
                      Same here Simcott, I found another PC that still had IE 8 on it and used that to open the file.

                      Comment

                      Working...
                      X