GME XRS 330C Glovebox Install

[Gazzopar Lurker Find all posts View Profile Close Gazzopar]

Hi all,

On the weekend I completed the install of my new XRS 330C outback pack from GME. While I know that its a hide away unit, i still wanted it to be easily accessible should i need to fix something out on the road. I always saw the "card holder" in the glove box as a perfect spot but wasn't sure it would fit. Well I can confirm it does! After I stuffed around for about 30 mins trying to pop the card holder out, and failing, I pulled the console out and realised it is screwed in from behind (this would have saved the damage you can see in the glove box pics).

Pretty happy with how clean it looks, and I have the ability to plug the hand held radio straight into the unit if need be.

Let me know what you think.

Cheers

[prwilli Lurker Find all posts View Profile Close prwilli]

Hi good job I did mine today as well thanks for the info one question is where did you tap into the power source thanks paul

[Gazzopar Lurker Find all posts View Profile Close Gazzopar]

Hi Paul,

I decided to use an “add a fuse” and just plugged it into one of the spare slots in my internal fuse box under the steering wheel. Was super simple and in the future if I want to change from accessory power to direct power I can just move slots and which out the fuse. I connected the earth wire to a bolt and screw right near the fuse box.

All a lot easier than I thought.

Cheers,

G

[Loz666 Lurker Find all posts View Profile Close Loz666]

How do you remove the console and how much comes out? I don't mind a bit of pulling stuff out but don't want a pile of parts!