Announcement

Collapse
No announcement yet.

Reversing camera wiring route through rear door

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Reversing camera wiring route through rear door

    Hi,

    I have the poverty pack GX which does not come with a reversing camera, but i have bought a camera to install. i was wondering if there is anyone with a GXL or above who can describe or put up some photos showing where the reverse camera cable enters the back door from the outside. I have not taken the spare wheel off to look but I cannot see any obvious place where the cable must penetrate the door skin.

    Thanks
    Ando
    2010 GX Turbo Diesel

  • #2
    Re: Reversing camera wiring route through rear door

    I had a look on my Kakadu. The wiring comes through a concertina type tubing and enters the door between the two door hinges. More towards the lower hinge, not central.

    Comment


    • #3
      Re: Reversing camera wiring route through rear door

      Thansk Laok. I have the same cable sheath and now I need to know where the camera wire comes out through the door skin on the outside. Presumably it comes out underneath the spare wheel somewhere.
      2010 GX Turbo Diesel

      Comment


      • #4
        Re: Reversing camera wiring route through rear door

        Originally posted by andoland
        Thansk Laok. I have the same cable sheath and now I need to know where the camera wire comes out through the door skin on the outside. Presumably it comes out underneath the spare wheel somewhere.
        On my VX (the spare is underneath the truck), the camera is mounted above the number plate which is in the center of the back door just under the 'Land Cruiser' chrome strip, but I think that may be the camera has been relocated on the 'OZ' versions (with the rear door mounted spare), but it is highly likely that the wiring comes out of the same part of the door.

        Cheers, Rob

        Comment


        • #5
          Any updates on this topic, I have the same issue since I have the camera but have no clue how to route it to the head unit. Appreciate photos by those who had performed this procedure earlier. Cheers.

          Comment


          • #6
            The wiring comes out the door through a central gromit behind the spare tyre holder frame.
            My Rig: 150 GXL D4D, Tough Dog adjustable suspension with 60mm lift, Polyair bags, ARB Winch Bar, Warn Winch with Dynamica Rope, Outback Ideas recovery points, GME UHF, HID Low/High Beam, Lightforce Genesis HID Spots, Dual Battery Setup with rear power outlets, ARB air compressor in engine bay, ~30L Watertank mounted behind fueltank.

            Comment


            • #7
              Pictures here of the wiring on the rear door
              http://www.pradopoint.com/showthread...l=1#post278782

              Comment

              Working...
              X