Tweet
Did some fine tuning to my rear storage option yesterday and found a usually unused storage option in the rear window area. It's a perfect spot to store all my spare filters, belts, hoses etc. I'm sure that any storage solution could be modified to use this dead space. I lined the window with some high density foam to protect it from damage too.
-
-
Hi Boneyone,
hey, I’m putting a rear shelf in my 2012 150 above 3rd row of seats, but only realised that the 2 tie down points behind 2nd row seats are part of 3rd row seats which even when folded still bounce around a bit. So, did you use these mount points for your setup or some other fixed mount points?
-
I used the 3rd row seat's front anchor points (and the bolts too) to anchor the frame of my storage mods.Comment
-
I removed the four tie down points and used M6 bolts. Yes, the ones in the back of the third row seats do have a bit of movement but they have served me well for many years now so nothing to worry aboutComment
-
Thanks for the responses guys. Ok, I’m happier using the tie down points, but I ended up pulling a few covers over the 2nd row seat mounts and found a bolt I’m going to put a length of flat down to just to give bit more rigidity at the end of the fridge slide. See pic.
Comment
-
Nice. Im currently planning my space use now. Here is another solution to maximise often unused space on my list:
https://www.kaon.com.au/standalone-r...oyota-prado-12Comment
Comment