Bumpstop problem and possible cure for KDSS Prado's.

[KAKADAZ Avid PP Poster! Find all posts View Profile Close KAKADAZ]

There are small differences between the 120 and 150, although most parts look very similar. The 150 airbags have a retaining bolt fitted at their front edge, and a different style lower mount, so they do not need another retainer. Also, if fitting longer shocks the standard bags may failure early in their life as they will be subatantially more stressed, particularly when used in High (airbags are like people, the get shorter as they get older...).

Keep me posted on your replacements thanks mate and also someone in Perth that can tackle mine..Cheers

[kcharng Junior Member Find all posts View Profile Close kcharng]

Congratz! Kakadaz, that looked great.

Just a quick question, could you give some details on where and what type of washers you used to fool the sensors?

Thanks

Mines all done now Lovell springs (+45mm) up front Bilsteins struts, rear Bilsteins and panel washers raising the bags to end up with 825mm rears up from 780mm and fronts at 815mm up from 770mm ride is great the extra clearance is also great.

[KAKADAZ Avid PP Poster! Find all posts View Profile Close KAKADAZ]

Congratz! Kakadaz, that looked great.

Just a quick question, could you give some details on where and what type of washers you used to fool the sensors?

Thanks

Just two packets of flat panel washers from bunnings..I put I think 12 under eack bolt giving roughly x3 lift 12=14mm =42mm lift give or take.