Tweet
Is there a how to thread to install.
My search doesn't show anything more than 5 threads
My search doesn't show anything more than 5 threads
-
-
2006 GXL petrol auto. ARB deluxe bar x3 HID IPF's, ARB alloy roofrack, ARB awning, BFG A/T, Safari snorkel, Piranha breathers, Pacemaker extractors, custom Ironman 45710FE 436-569mm with Dobinsons 350, custom Ironman 45682FE 383-618mm with Dobinsons 487, Firestone kevlar 60psi airbags, 30mm extended Roadsafe links, AMTS bashplate and recovery points, ABR Flyer with Powersonic AGM. -
Cheers mateComment
-
I've install the struts but have noticed the springs rub hard on the ucaComment
-
That's not right, make sure everything it sitting right on the seats and everything is bolted up correctly[LEFT]Silver 150 Facelift
TJM Bullbar, Lightforce Genisis Spots, Dual Battery System with bits from everyone, Powerful 4x4 slider/steps, Kaymar rear bar, "Genuine" Roof Racks, MSA Seatcovers, Dashmat, Tint, LED Interior Globes, Bridgestone D697s [/LEFT]Comment
-
Lots of brands have too much travel & do that.Originally posted by rhodesy View Post
IMO it's crap, poor engineered products.
What do you have?Comment
-
Bilsteins and King springs hdComment
-
What's the full extension spec on the bilsteins you have?Originally posted by rhodesy View Post
It's too much.
The greater the c/v angle the greater your chance of damaging a c/v too.Comment
-
What's the new suspension height? What accessory weights have you got over the front?Originally posted by rhodesy View PostComment
-
it measures about 60mm after install.
one side looks like it will rub at full extension
front has steel bar, steel winch and dual batterys.
King Springs
Coil Springs
KTFR-101HD
Heavy Duty Coil Spring (TOP END MACHINED) (sold in pairs)
0
King Springs
Coil Springs
KTRR-102HD
Heavy Duty Coil Spring
0
Bilstein
Shock Absorber
BE5A712
46mm Monotube Gas
0
Tough Dog
Strut Tops
TOY-1084
Rubber Strut Tops. (sold in pairs)
0
Bilstein
Shock Absorber
24-238830
46mm Monotube Gas
0
thats the kitComment
-
The new strut tops may explain how you are getting some UCA contact with the coil.Comment
-
could be whats happening. what causes this will it dissapear once they settleComment
-
IS this what happens?Originally posted by rhodesy View Post
I am trying to figure out a solution for this.
My setup is similar to yours
1X PAIR FRONT KING SPRING COILS: KTFR-101 HD
1X PAIR REAR KING SPRINGS COILS: KTRR-102 HD
1X PAIR FRONT BILSTEIN FRONT STRUTS: BE5-A712
1X PAIR REAR BILSTEIN REAR SHOCKS: BE5-A713
Will need to change the split boots but need a solutions otherwise the boot will split again.Attached Files2010 Silver Prado 150 Series : Blackvue Camera: GME UHF Radio: TG150: ARB Deluxe winch bar: ARB Bash plate: T-Max Winch: Narva HID lights:Comment
-
-
What is your ride height??
What is your full droop measurement??
Something isn't right for that to be sitting like that.[LEFT]Silver 150 Facelift
TJM Bullbar, Lightforce Genisis Spots, Dual Battery System with bits from everyone, Powerful 4x4 slider/steps, Kaymar rear bar, "Genuine" Roof Racks, MSA Seatcovers, Dashmat, Tint, LED Interior Globes, Bridgestone D697s [/LEFT]Comment
-
That picture is taken when the Prato is on the hoist.
The current front and back ride is 840. It been like that after 3 years installed. Since the it been to the Simpson.
Wondering if the spring have been install upside down? The model no: printed on the spring is reading upside down.2010 Silver Prado 150 Series : Blackvue Camera: GME UHF Radio: TG150: ARB Deluxe winch bar: ARB Bash plate: T-Max Winch: Narva HID lights:Comment
Whitey
Comment