OME 30mm Lift

[Jkspinner Junior Member Find all posts View Profile Close Jkspinner]

Has anybody installed the OME 30mm lift. If so, could you post the heights you have achieved, especially the rear. I know the 50mm medium coil (2889) will deliver a height of approx 835mm
Just wondering if the equivalent medium coil for the 30mm coil will deliver. I think the part number is 2895E.
Thanks

[Whitey Shockie Maker of the Month Award Find all posts View Profile Close Whitey]

Has anybody installed the OME 30mm lift. If so, could you post the heights you have achieved, especially the rear. I know the 50mm medium coil (2889) will deliver a height of approx 835mm
Just wondering if the equivalent medium coil for the 30mm coil will deliver. I think the part number is 2895E.
Thanks

Hey,

The ride height can vary a lot depending on the weight, see the variation of the 889 coil here, running over 825-850mm;

http://www.pradopoint.com/showthread...il-free-length

Unfortunately there wasn't an 895 for the 150 data, but I did have one for a 120 here;

http://www.pradopoint.com/showthread...0-series-Prado

On the 120 the 895 gave about 1.4" = 35.6mm of lift. I can't recall what accessories that 120 had, so unfortunately can't help you weight wise.

Hopefully someone with a 150 and an 895 will chime in soon!

Best

Mark

[Jkspinner Junior Member Find all posts View Profile Close Jkspinner]

Thanks Mark, The 895E med and 895 (200kg) according the ARB offer the 120 series a 40mm lift and the 150 a 30mm lift, perhaps because the 150 is slightly heavier. I have measured the 889 on a mates car which sits about 835mm with full tank, tow bar and no load.