Announcement

Collapse
No announcement yet.

Lovell Coils and Lovell's Shocks ??

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Lovell Coils and Lovell's Shocks ??

    Guys.....

    I'm in the process (like many I guess) of looking for a suspension setup for our new 150s. We will be having a ARB Steel Bar fitted + Dual Batteries with the possibility in the future of a electric winch (3>4yrs time)

    I've been looking at the Lovells Kit of Lovells Coils and Shocks with the following Codes:

    TFR118 (Front Coils)
    TRR119 (Rear Coils)

    64610087F - (Front Struts)
    64612489 - (Rear Shocks)
    (I believe these Shocks/struts are rebuidable..... not that, that means much)

    My question has anybody experienced these and should I be looking at the HD Coils Front and Rear for the accessories fitted + we will be using the Car to tow a 16" semi Offroad Van? I do want a minimum of a 50mm lift as well.The car will be driven by the missus during the week ferrying the kids around, etc...... so I have to consider the ride as well

    Any help/advise will be great

    cheers..
    rob
    [I]cheers..... Rob (macca)[/I]
    [I][B][COLOR=DarkRed]Car-4: 1996 Defender Tdi [/COLOR][/B][/I]
    [I][B][COLOR=Blue]Car-3: 1996 Discovery Tdi Auto[/COLOR][/B][/I]
    [B][I][COLOR=Green]Car-2: 1993 Suzuki Vitara 4Dr (modified for Playing) [/COLOR][COLOR=#ff0000]Now Retired[/COLOR][COLOR=Green] [/COLOR][/I][/B]
    [B][I][COLOR=DarkOrchid]Car-1: 2010 Toyota Prado 150's (Missus Car/current touring vehicle)[/COLOR][/I][/B]
    Tags: None
  • #2
    How did you go Rob?

    Did you install Lovell shocks and springs.struts etc?

    Happy?
    SE Qld: GX 150GD Auto, (Feb'16 build): TJM T15 steel b bar, 9,500lb TORQ winch, TJM s steps, Rhino Pioneer Platform (42102B 1928X1236mm), front recovery points, Wynnum towbar, P3 brake controller, TNN Underbody guards, UHF, TREKtable & LED striplight, Custom Fridge & Drawers, Waeco CFX50, 9inch illuminator 160W LED spots, 40mm lifted Dobinson Suspension (Zordo's), ScanguageII, 30 Sec Wing Awning

    Comment

    • #3
      Yeah ... I'm happy with the ride, etc. A little more lift would've been good but what's an extra 10mm or so..... My measurements are as listed below:

      Suspension height measurement - STD:
      LHS: Bottom of Rim to Guard 786mm (Rear) // 755mm (Front)
      RHS: Bottom of Rim to Guard: 786mm (Rear) // 760mm (Front)

      Suspension height measurement - STD with ARB Bullbar installed:
      LHS: Bottom of Rim to Guard 786mm (Rear) // 745mm (Front)
      RHS: Bottom of Rim to Guard: 786mm (Rear) // 745mm (Front)

      Suspension height measurement - with 2" LOVELLS SUSPENSION with ARB Bullbar installed:
      LHS: Bottom of Rim to Guard 830mm (Rear) // 775mm (Front)
      RHS: Bottom of Rim to Guard: 830mm (Rear) // 785mm (Front)
      [I]cheers..... Rob (macca)[/I]
      [I][B][COLOR=DarkRed]Car-4: 1996 Defender Tdi [/COLOR][/B][/I]
      [I][B][COLOR=Blue]Car-3: 1996 Discovery Tdi Auto[/COLOR][/B][/I]
      [B][I][COLOR=Green]Car-2: 1993 Suzuki Vitara 4Dr (modified for Playing) [/COLOR][COLOR=#ff0000]Now Retired[/COLOR][COLOR=Green] [/COLOR][/I][/B]
      [B][I][COLOR=DarkOrchid]Car-1: 2010 Toyota Prado 150's (Missus Car/current touring vehicle)[/COLOR][/I][/B]

      Comment

      Previous template Next
      Working...
      X