Ok guy's I want to fit a 42" light bar to my roof rack but how do I run the wiring
What have people done
Don't really want to drill holes in the roof
Thanks
I'm doing the same thing but have read on here somewhere to run it from the engine bay up the right side of the windscreen to the leg of the roof rack.
S
S
2012 GXL D4D Graphite, BFG All Terrains, window tint, ARB Sahara bar, IPF driving lights, UHF radio, cargo barrier, Brown Davis under body protection, dual battery, TJM 2" Lift, Safari Snorkel, Grande MK11 12000LB winch, Flat roof rack, 3" Stainless Steel Berklee Exhaust, TJM Side Steps, TJM canvas seat covers.
As this is in the 90 Series section, I'm pretty sure that the 90 doesnt have the same trim up the side of the window, so I imagine up the back door as BlakMoth has suggested.
As this is in the 90 Series section, I'm pretty sure that the 90 doesnt have the same trim up the side of the window, so I imagine up the back door as BlakMoth has suggested.
Yep good point.
" Matt Damon!" 😝
2008 120 GX D4D with a few extras
Rig build here
[url]http://www.pradopoint.com/showthread.php?33115-Mattfunk-s-120[/url]
Yeah my bro has a 90 and the windscreen doesn't have the channel that the 120.
The roof gutters are different too so it will be a challenge for him to hide the wiring.
Sent from my iPhone using Crapatalk
Cheers
Blake
04 Silver Diesel GXL with lots of stuff
[SIGPIC][/SIGPIC]
yep I went up from the engine bay up the right side of the windscreen to the leg of the roof rack. Wiring sits nicely in the guttering. Had pry open the bottom bit of the gutter a little to fit the wire but worked out well. I then jst used black tape to hold it in place.
96 GXL Prado 3.4L with 50mm HD front coils and MD rear coils with poly airbags, Bilstein shocks, 265/75R16 Federal couragia MT's, black sunnies, GME TX4600 UHF, ZCG 6.6db antenna, Narva 175 driving lights, 20" and 38" LED light bars, roof rack, Safari snorkel, ARB bar, Redback extractors and a custom 2 1/2" exhaust.
Comment