uneven tyre wear?

[Kalex Junior Member Find all posts View Profile Close Kalex]

I have a '97 Prado Rv 2.7 that is lifted. I run 225/75 AT's.
Ever since i bought the Prado 18 months ago it has scrubbed the inside of the rear right tyre. All the others wear even.
WHY???
The lift which was fitted before i bought it does look a little higher in the rear than most 2" lifts. Could it be pulling the suspension geometry out?
Any help would be great.

Alex

[Guest Close Guest]

If you lift more than 2" mostly the axle would push the rear right wheels out a bit more and they can be fixed with fitting adjustable panhard rods. In your case maybe a trip to a tyre shop and have a wheel alignment might fix the prob

[Snaga Wishing I was lost Find all posts View Profile Close Snaga]

Were the tyres on there when you bought the Prado 18 months ago?

I had the same issue with the original tyres when I bought mine 2nd hand...( it was just the back ones) and the end assumption was the previous owner didn't align them properly on the front which did the damage and then moved them to the back. No matter what pressure I ran I couldn't stop the strange wear.

Now, 20K later on the Coopers I haven't had any of the same problems.