Require Avenger / Kingone winch wiring instructions

[winniliss Avid PP Poster! Find all posts View Profile Close winniliss]

Hello,

Currently installing my Avenger / Kingone TDS 9.5 winch. A wire diagram wasn't supplied and there isn't one on the Avenger and Kingone websites.

On the winch it has three terminal posts to bolt the cables to. They are:

A: (white cable)

F-1 (yellow cable)

F-2 (blue cable)

The three cables for the control box are colour coded - Blue, yellow and white which helps when connecting them to the control box but not to the winch. Does anyone know how? (I have worked the cables out but also got a copy of a wire diagram from Avenger 4x4)

The long black cable (earth) bolts to the winch casing on the opposite side of A: and the other end to the negative terminal on the battery

The long red cable bolts to the terminal post colour coded red on the control box and the other on to the positive terminal on the battery

Last, what battery do yuo use for the wireless remote? Its not AA or AAA. It needs to be about 3cms long and about the same thickness as a AAA. Battery is a L1028 (12v)

Here are some photos

[1coolbanana Avid PP Poster! Find all posts View Profile Close 1coolbanana]

All sorted then
Let us know what you think, that winch is on my list too!
What about a bit of a review?

So what the deal with the battery?

[winniliss Avid PP Poster! Find all posts View Profile Close winniliss]

The remote didn't come with a battery so I will sort it out on Monday. I will upload photos and install instructions soon as well. Overall the install was OK.

[Snaga Wishing I was lost Find all posts View Profile Close Snaga]

My mechanic sells the Kingone winches... be interested to hear how they go.

[1coolbanana Avid PP Poster! Find all posts View Profile Close 1coolbanana]

The remote didn't come with a battery so I will sort it out on Monday. I will upload photos and install instructions soon as well. Overall the install was OK.

Look forward to seeing that.
What bar have you got?

[winniliss Avid PP Poster! Find all posts View Profile Close winniliss]

What bar have you got?

ARB Deluxe Bar

[Hutch Addicted PP Member Find all posts View Profile Close Hutch]

http://search.dicksmith.com.au/electronics/23a%2012v

Can't help with the cables but the battery would be a 23A i think.

[winniliss Avid PP Poster! Find all posts View Profile Close winniliss]

http://search.dicksmith.com.au/electronics/23a%2012v

Can't help with the cables but the battery would be a 23A i think.

Sounds like the go. Will go and see Mr Smith tomorrow.

The cables I have sorted. The white cable was longer than the other two so I figured it attached to A: (being further away then F-1 & F-2). The other two was a 50/50. When I hooked them up, instead of winching in, it winched out. Just swapped the cables around and all is good. I have amended my original post with red text identifying what goes where. Today I will just tidy up the cabling etc and do a write up.

[1coolbanana Avid PP Poster! Find all posts View Profile Close 1coolbanana]

Hows it going with the Mako, keen to see and hear what you think?

[winniliss Avid PP Poster! Find all posts View Profile Close winniliss]

Hows it going with the Mako, keen to see and hear what you think?

I have been doing two jobs at once (dual battery and the winch) so it's taking a bit longer. I will finish the cabling tomorrow and I will do the write-up this week or next. The only thing people need to know when purchasing one of these winches for an ARB deluxe bar is that you need an offset Hawse fairlead. This will bolt onto the lower mounting holes on the winch. As a result, you will need longer bolts. Just inform the seller of this.

[winniliss Avid PP Poster! Find all posts View Profile Close winniliss]

Finished my winch install http://www.pradopoint.com/showthread...o-GXL-TD/page2