Tweet
Is it 2.5m along the car and 2m out? Or the other way round?
-
Big Dog
[B]2008 GREY GXL D4D[/B] with Sovereign Bar, PP Sticker, IPF 900 Spot/Spread Blue Covers, GME3440 UHF, AMTS Spacers, 275/65 R17 BFG's, Autocraft Sliders/Steps, Safari Snorkle, Hilux Washers, ARB Alloy Roof Rack, Ironman Awning [B]Yet To Come[/B] - 2" Lift, Dual Battery, AMTS Bash Plates, DIY Drawers, Diff Breathers, Rear Locker....Much More. -
Hi Bigdog, I have one too, yes it is 2.5 m along the car and 2m out.Originally posted by BigDog816 View Post
Mark[B]White D4D GXL auto Mickey Thompson ATZ 4 rib 265/70 R17, Genuine towbar, OME Suspension, ARB Sahara bar, Safari Snorkel, Icom 440N UHF, Rhino sportz bars, redarc BCDC1240 dual battery system, Drifta drawer setup, headlight upgrade.....more to come....[/B]
My Rig Build [url]http://www.pradopoint.com/showthread.php?24451-Mark-s-White-D4D-GXL[/url]Comment
-
Hi Jimmy, I had the extension made 2.5 x 2.5. I had eyelets put in at 1.9 from the awning side, so if needed it can be a wall with the awning poles holding it down. The extra bit on the end makes either a short wall or a little more extenion.Originally posted by jimmy91 View Post
Worked well at TuffTruck on the weekend, I'll post up a photo shortly.
Sent from my iPad using Tapatalk HDD4D Prado GXL - 2014. 2" OME lift, ARB Deluxe Winch bar, ARB under body protection plates, ARB EZ Deflator, Weaco fridge, Matsen fridge on slide, BFG A/T's, ARB CKMA12 compressor, Oztrail side awning with LED lights PLUS canvas extension, Lightforce XGT's.. Oricom UHF380, GME AE4017
Comment
-
Here are two of the awning and the new extension setup out front of the makers. Free plug for them....
ED. Wow, compression really shrunk those images...
Mark.
Sent from my iPad using Tapatalk HDAttached FilesD4D Prado GXL - 2014. 2" OME lift, ARB Deluxe Winch bar, ARB under body protection plates, ARB EZ Deflator, Weaco fridge, Matsen fridge on slide, BFG A/T's, ARB CKMA12 compressor, Oztrail side awning with LED lights PLUS canvas extension, Lightforce XGT's.. Oricom UHF380, GME AE4017Comment
-
-
Somytigerz11 awning arrived this week. Bit confused on how you fit it, the were no instructions supplied with the awning. As there are quite few pieces that don't appear on the following link that I found whilst searching the Internet http://www.tigerz11.com.au/2.pdf I'm interested to hear and if possible see a few pictures on how those who have purchased this awning have fitted it to the vehicle I should also note that I have the Tigerz11 clamp on roof rack
I'll attach a photo of the pieces I received in the box once I work out how you attach a photo from an IPad.[SIZE=1][B][COLOR=#ff0000]2010 Silver GXL Prado T/D Auto.
[/COLOR][COLOR=#0000ff]2014 Leisure Matters X-Track Camper Trailer.[/COLOR][/B][/SIZE]Comment
-
Hi Fabes have attached a couple of photos of how I attached the awning, I know what you mean about confusing and all the bits and pieces that come with it. I just drilled through the main upright brackets on rack and bolted straight to it.
Hope this helps
Troy2012 TD GXL - Genie 3inch Exhaust System, ARB Deluxe Winch Bar & Steps, OME 50mm Suspension, M/T ATZ P3's, Safari Snorkel, ARB UVP, Redarc Dual Battery System with Optima D34, Custom made rear draws, ARB 60L fridge, IPF 900XS lights, ARB Air Compressor, Tigers11 Roof Rack & Awning.Comment
-
Originally posted by ROY07 View Post
Thanks Troy
I seen a few 4x4's today which have done it the same way also, seems the easiest way.
cheers[SIZE=1][B][COLOR=#ff0000]2010 Silver GXL Prado T/D Auto.
[/COLOR][COLOR=#0000ff]2014 Leisure Matters X-Track Camper Trailer.[/COLOR][/B][/SIZE]Comment
-
Fabes, if it is anything like the Sugar Glider. You put the short aluminium things into the slots in the bar. the Bolts then go into those and through your rack.Greg - 08 D4D Prado,
Some trips done - Cape York, Fraser Island, Simpson Desert / Central Aust, Vic High Country.Comment
Comment