I'm in the market for some new switches for some new lighting that is going in. The guys over at the FJ forum found that there are new laser etched rocker switches that will illuminate clearly what the switch is. Here is the website:
http://www.otrattw.com/products.php?cat=34
If anyone in Adelaide wants to get some in the same shipment, let me know.
Can also do Sydney as I'll be sending a parcel up to my family in 2154.
I'm interested in these
http://www.otrattw.com/proddetail.php?prod=VVPZCOR-1F1
http://www.otrattw.com/proddetail.php?prod=VVPZCRL-113
with either of these bodies
V1D1GHCB -SPST OFF/ON - Green upper LED, Red lower LED when the switch is turned ON
The green LED would be wired to the dashlights.
Pinouts can be downloaded from here
https://www.box.com/shared/zr6yccnzblkh1kxvwiqq
Panel cutout required is .830" (21.1mm) by 1.45 (36.8mm)
According to this diagram, the 120 cutout is 20.8mm by 35mm
And the 150 cutout is 27.8mm by 22.5mm
http://www.otrattw.com/products.php?cat=34
If anyone in Adelaide wants to get some in the same shipment, let me know.
Can also do Sydney as I'll be sending a parcel up to my family in 2154.
I'm interested in these
http://www.otrattw.com/proddetail.php?prod=VVPZCOR-1F1
http://www.otrattw.com/proddetail.php?prod=VVPZCRL-113
with either of these bodies
V1D1GHCB -SPST OFF/ON - Green upper LED, Red lower LED when the switch is turned ON
The green LED would be wired to the dashlights.
Pinouts can be downloaded from here
https://www.box.com/shared/zr6yccnzblkh1kxvwiqq
Panel cutout required is .830" (21.1mm) by 1.45 (36.8mm)
According to this diagram, the 120 cutout is 20.8mm by 35mm
And the 150 cutout is 27.8mm by 22.5mm
Comment