How to clean a Prado?

[D4D Addicted PP Member Find all posts View Profile Close D4D]

Got a name/brand/size/pic of the spray bottle you use?

[Auss15 Junior Member Find all posts View Profile Close Auss15]

x2, excellent stuff

cheers
Steve

+3 on Meguiar's that's all I use on all my cars..

[Peterpilot Avid PP Poster! Find all posts View Profile Close Peterpilot]

Got a name/brand/size/pic of the spray bottle you use?

I acquired mine about 25 years ago as a lucky door prize at a NSW TLCC meeting in 1988 along with a 1L bottle of CT18 and I was converted since then. No brand name, says "Made in USA" on the top. I'm sure you can pick up something similar at Bunnings or Repco. This is my basic cleaning kit which consists of CT18, spray bottle, sponge and high pressure hose nozzle.

[D4D Addicted PP Member Find all posts View Profile Close D4D]

Thanks Peter, I usually use a small pump sprayer thingy but this looks to be a better idea.

[SGS Member Find all posts View Profile Close SGS]

CT18 disolved in a bucket of warm water and a soft cloth - old towels are fantastic (we have a hot water tap outside - very handy) Rinse with warm water too.

[D4Dforme Senior Member Find all posts View Profile Close D4Dforme]

CT18 is good stuff but it will strip your wax off as well........I use it sparingly because of this and use something like turtle wash/wax for regular washing every 2mths or so.........My prefered washing agent though is rain.....


Dan

[Smithy - 120 D4D Senior Member Find all posts View Profile Close Smithy - 120 D4D]

Got a name/brand/size/pic of the spray bottle you use?

I reckon you could use a weed n feed bottle after the contents have been used on your lawn. Same principal, with hose attachment, so detergent gets diluted as you use it.

[mjrandom Out of control poster! Find all posts View Profile Close mjrandom]

I reckon you could use a weed n feed bottle after the contents have been used on your lawn. Same principal, with hose attachment, so detergent gets diluted as you use it.

And you won't get any bindii growth either! Truck wash will strip wax so make sure you keep an eye on that. I used to use it before a clay bar and full polish. The snow foam does the trick now.

[winniliss Avid PP Poster! Find all posts View Profile Close winniliss]

You could use CT20 being a wash and wax http://www.chemtech.net.au/CHEMTECH_...1032012%20.pdf

This link lists most if not all their products

Winston

[Peterpilot Avid PP Poster! Find all posts View Profile Close Peterpilot]

Yes, I also use CT20 wash & wax as well as CT14 degreaser

[Peterpilot Avid PP Poster! Find all posts View Profile Close Peterpilot]

Try this link to the Chemtech catalogues: http://www.chemtech.net.au/cr_prodbroc.html

[Peterpilot Avid PP Poster! Find all posts View Profile Close Peterpilot]

Got a name/brand/size/pic of the spray bottle you use?

Apparently a Chemtech hose attached spray gun is available: http://www.chemtech.net.au/chemtech_accessories.html

[matt150 Avid PP Poster! Find all posts View Profile Close matt150]

I acquired mine about 25 years ago as a lucky door prize at a NSW TLCC meeting in 1988 along with a 1L bottle of CT18 and I was converted since then. No brand name, says "Made in USA" on the top. I'm sure you can pick up something similar at Bunnings or Repco. This is my basic cleaning kit which consists of CT18, spray bottle, sponge and high pressure hose nozzle.
[ATTACH]11897[/ATTACH][ATTACH]11898[/ATTACH][ATTACH]11899[/ATTACH][ATTACH]11900[/ATTACH]

X 2 for me also.

[mjrandom Out of control poster! Find all posts View Profile Close mjrandom]

What's the foam gun worth? Very similar to the snow foam lance which comes in fitments for Bernini, labor, marcher etc.

[D4D Addicted PP Member Find all posts View Profile Close D4D]

What's the foam gun worth?

$90

http://www.ebay.com.au/itm/HEAVY-DUT...-/160940517802