Interpreting Injector value results

[MAroochyrob Lurker Find all posts View Profile Close MAroochyrob]

Hi All,
I would appreciate your feedback on my 150 injector values and if there is anything I need to be concerned about at the moment. I have had them done at both 150,000k and recently at 160,000k as below:
150000k 160,000k
Inj 1: -0.4 Inj 1: -1.1
Inj 2: 0.4 Inj 2: 0.7
Inj 3: 1.00 Inj 3: 1.5
Inj 4: -1.5 Inj 4: -1.6

They were done cold and I was told that they are within spec but am not sure how to read them so any advice would be greatly appreciated.
thanks Rob

[krypto Avid PP Poster! Find all posts View Profile Close krypto]

There has been a lot of discussion on this, ############# has posted some really useful info particularly on just interpreting one set of values and the need to look at the bigger picture.

Have a look here: http://www.pradopoint.com/showthread...njector+values and http://www.pradopoint.com/showthread...njector+values

Also it's always good to do a search before posting as the more similar threads there are the harder it becomes to find an answer.

[MAroochyrob Lurker Find all posts View Profile Close MAroochyrob]

Injector values

Hi Krypto,
Thanks for that. I did a couple of searches on interpreting injector values etc but nothing came up hence my post. I appreciate you pointing me in the right direction.
Rob

[ozimacca Member Find all posts View Profile Close ozimacca]

Hi Krypto,
Thanks for that. I did a couple of searches on interpreting injector values etc but nothing came up hence my post. I appreciate you pointing me in the right direction.
Rob

I find it is usually better to use Google, type Pradopoint: your topic, seems to be more effective