Petes 150 Kakadu

[smakb Advanced Member Find all posts View Profile Close smakb]

Nice. I will have to get some

[MidLifeCrisis Out of control poster! Find all posts View Profile Close MidLifeCrisis]

Nice rig mate. Have just put a chip-it chip in my 120 and there are a few 150 boys doing the same. Good chip and 10% off through the forum if your interested.

[Melbo Member Find all posts View Profile Close Melbo]

wasn't sure how the 3rd row would work with the fold down seating.

Thanks Kondo. After your post, I contacted them and was told that there is no third rear seat mat. It is just a rear cargo mat which is best suited for a gx model with a five seater. It's a not suitable for any 7 seater models.

[kondo Junior Member Find all posts View Profile Close kondo]

Nice rig mate. Have just put a chip-it chip in my 120 and there are a few 150 boys doing the same. Good chip and 10% off through the forum if your interested.

Hi Mate,

I have actually been reading all the posts on it this afternoon - got me interested thats for sure...

You put the exhaust on too didn't you??

Do you know if there are any installers/retailers in Brisbane?? Last thing I feel like doing is playing around with a brand new car myself.

But if the power is that good I may look at it sooner rather than later Just dont know if I could hide the EGT guage from the boss

[kondo Junior Member Find all posts View Profile Close kondo]

Thanks Kondo. After your post, I contacted them and was told that there is no third rear seat mat. It is just a rear cargo mat which is best suited for a gx model with a five seater. It's a not suitable for any 7 seater models.

Fair enough - I actually never asked but thats one thing I dont need to worry about now then thanks mate

[MidLifeCrisis Out of control poster! Find all posts View Profile Close MidLifeCrisis]

Hi Mate,

I have actually been reading all the posts on it this afternoon - got me interested thats for sure...

You put the exhaust on too didn't you??

Do you know if there are any installers/retailers in Brisbane?? Last thing I feel like doing is playing around with a brand new car myself.

But if the power is that good I may look at it sooner rather than later Just dont know if I could hide the EGT guage from the boss

From the chip-it webpage:
QLD:

Torque n Tune. 72 Caloundra Rd CALOUNDRA. PH: 07 5499 6488. (DYNO)

Competitive Auto. 2/106 Keogh St West IPSWICH. PH: 07 3812 1233.

AMS Automotive. 46 Broad St SARINA. PH: 07 4956 2200.

AAA Exhaust and Fabrication. 9 McCulloch Street NORTH MACKAY. PH: 07 4957 4591. www.aaaexhaust.com.au

I will PM you re the discount and installers. This may be an issue.

[wooley Avid PP Poster! Find all posts View Profile Close wooley]

thanks for the pictures, they look great, will have to order some.

[kondo Junior Member Find all posts View Profile Close kondo]

Gday Guys,

Finally got around to getting some photos after the bullbar install...

Great job by the guys at TJM Geebung - awesome service as always

Got them to put some washers on the bullbar for the headlights, work really well only issue is when you are parked on a downhill slope fluid does leak a little but I can deal with that. Also good surprise when I got back the guys had used a genuine (well genuine lookeing anyway) foglight switch for the spotlights, very impressed with this.

The colour match is good and I am really happy with the result. Also got some roofracks, a Hayman Reese Towbar and an ICOM UHF, overall very happy - even the front camera is still quite useful which I surprised about.

[Hutch Addicted PP Member Find all posts View Profile Close Hutch]

Looks the goods Pete.

[Rogerthatv2 Avid PP Poster! Find all posts View Profile Close Rogerthatv2]

Looks sweet Pete, almost twins next time we go out for a run! Cannot wait to get them both on the beach!

[kondo Junior Member Find all posts View Profile Close kondo]

Looks sweet Pete, almost twins next time we go out for a run! Cannot wait to get them both on the beach!

I know they are almost dead ringers - must have good taste

Mate I cant wait to get it on the beach - Nik isn't so keen but hey its rustproofed and it will be getting used You let me know when you are ready and I will be there!

[gxllouie Member Find all posts View Profile Close gxllouie]

hey pete,

do you know if tjm can/will use the existing bumber? the plastic bumber replacement is the one thing that is steering me away from tjm - i am yet to see one where the plastic bumper properly integrates with the lines of the car. if they can cut into the existing bumper and fit then they might have my business - i do like the lines and the fact it doesn't stick out too far.

louie

[kondo Junior Member Find all posts View Profile Close kondo]

hey pete,

do you know if tjm can/will use the existing bumber? the plastic bumber replacement is the one thing that is steering me away from tjm - i am yet to see one where the plastic bumper properly integrates with the lines of the car. if they can cut into the existing bumper and fit then they might have my business - i do like the lines and the fact it doesn't stick out too far.

louie

GDay Louie,

Mate im not too sure if they will or not - I have the bumper inserts and I am pretty happy at how well they line up - to me they look standard and do like the look far more than the bumper cut - but thats just me.

Have a good one.

[gxllouie Member Find all posts View Profile Close gxllouie]

GDay Louie,

Mate im not too sure if they will or not - I have the bumper inserts and I am pretty happy at how well they line up - to me they look standard and do like the look far more than the bumper cut - but thats just me.

Have a good one.

thanks mate. just showed your pics to my wife (been looking for a good side on photo) - she definitely prefers it to the arb bar. she doesn't like how the arb bar juts out so far.

your rig is looking good!!

[kondo Junior Member Find all posts View Profile Close kondo]

thanks mate. just showed your pics to my wife (been looking for a good side on photo) - she definitely prefers it to the arb bar. she doesn't like how the arb bar juts out so far.

your rig is looking good!!

Cheers Louie - no probs at all, my wife said the same thing about the TJM vs ARB bar, personally I dont mind the ARB bar (liked the TJM slightly more) but the wife by far preferred the TJM.

Have a good one.