MUMSRIG..... need I say more

[MUMSRIG Avid PP Poster! Find all posts View Profile Close MUMSRIG]

Hi Mumsrig
Could you point me where to get these LED lights from please and how much do they cost?
They are the best I have seen so far
Cheers
Robert

I'm pretty sure you can get that brand through SuperCheap and most AutoPro type stores Rob. I picked these up through a wholesaler in Perth though (much cheaper)...

Mitch

[gumboot Avid PP Poster! Find all posts View Profile Close gumboot]

I'm pretty sure you can get that brand through SuperCheap and most AutoPro type stores Rob. I picked these up through a wholesaler in Perth though (much cheaper)...

Mitch

Thanks Mitch, I have a look next weekend.
Cheers
Robert

[1tuff4b Member Find all posts View Profile Close 1tuff4b]

Hey there Mr Johnson.... It seems to have the extended draw bar as I can almost open the door all the way. It just hits the jerry can holder, so i'll be modding it and adding an extra Gas Bottle holder while I'm at it. I picked up a spare Gas Bottle holder and 2x extra Jerry Can holders the other day. We bought it 2nd hand off the original owners but I'm not 100% sure on the extended draw bar? Whats the over all length of yours?

The overall length of mine...........interesting question Mitch

I'll have to find a tape measure and check it over for ya

[Geoffury Find all posts View Profile Close Geoffury]

Hey Mitch, what do you think of the car DVR you got?
Value for money or would you buy a different one next time?

[MUMSRIG Avid PP Poster! Find all posts View Profile Close MUMSRIG]

Hey Mitch, what do you think of the car DVR you got?
Value for money or would you buy a different one next time?

For the money you can't go wrong. It's recording everytime we turn the accessories on and it hasn't missed a beat. The only thing that I don't necessarily like about it is it picks up a vibration type noise through the speaker especially on corrugations but thats just being picky...

I would buy another without hesitation.

[Trekrider Banned Find all posts View Profile Close Trekrider]

For the money you can't go wrong. It's recording everytime we turn the accessories on and it hasn't missed a beat. The only thing that I don't necessarily like about it is it picks up a vibration type noise through the speaker especially on corrugations but thats just being picky...

I would buy another without hesitation.

I have the same one as Mitch and would agree with what he says - only complaint I have is that it periodically goes back to the default date and time (1/1/10 at 00:01) which is a pain especially if you display date/time in picture.

[MUMSRIG Avid PP Poster! Find all posts View Profile Close MUMSRIG]

I have the same one as Mitch and would agree with what he says - only complaint I have is that it periodically goes back to the default date and time (1/1/10 at 00:01) which is a pain especially if you display date/time in picture.

Cant say i've had that problem...

[MUMSRIG Avid PP Poster! Find all posts View Profile Close MUMSRIG]

Went to Forster for the 1st time in many years last weekend.. Had a blast!! Weather was magic and the Jayco towed well. I changed the wheel studs to metric before we left and put the Prado rims off of the camper trailer onto it... Looks better now

[MUMSRIG Avid PP Poster! Find all posts View Profile Close MUMSRIG]

MUMSRIG gets a new set of boots on Saturday... Going for Nitto TrailGrapplers in the 265/70/17 variety... Tam wanted a set of Fuel matte black rims but was having difficulty in decided between two styles... They didn't have the correct size in stock and now she's changed her mind again LOL.

Anyways the tyres are in and I'll head to Sydney on Saturday to have them fitted up...

I'm hearing good reports on them but I'll wait and see..

[matt150 Avid PP Poster! Find all posts View Profile Close matt150]

Looking good Mitch. Where ya gettin them from ?

[Madkore Avid PP Poster! Find all posts View Profile Close Madkore]

They are tough looking tyres Mitch - what made you pick them?

[MUMSRIG Avid PP Poster! Find all posts View Profile Close MUMSRIG]

Looking good Mitch. Where ya gettin them from ?

Taleb Tyres on Princes Hwy Matt... They are SO QUIET compared to the Mickey T's and grippy as all buggery as Tam will atest to after the manoevre I made last night on the way back to Muso from Newie in order to dodge a Roo!

They are a bit taller than the old Mickey T's also as the MAXTRAX clipped the garage on the way in . It was no where near it before LOL

[MUMSRIG Avid PP Poster! Find all posts View Profile Close MUMSRIG]

They are tough looking tyres Mitch - what made you pick them?

Tam wanted something quieter than the Mickey T's and I wanted something that still looked agressive as well as keeping a Mud Tyre. They also come up with some pretty good reviews and were $50 a tyre cheaper than the mickey T's. The Mickey T's are now on the Jayco...

[MUMSRIG Avid PP Poster! Find all posts View Profile Close MUMSRIG]

Finally fitted up some new Brake Rotors and pads to the front of MUMSRIG today... She was starting to get a decent pedal pulsation so she was more than due for a birthday.

Used the RDA Rotors and Pads so will see how they go. hey look nice LOL



Also fitted up the LED work lights I bought a while ago.

[MUMSRIG Avid PP Poster! Find all posts View Profile Close MUMSRIG]

I've also got a H4 55w HID high/low kit sitting here to wire up tomorrow and the front view 180 degree camera to fit up... I also spent a couple of hours setting up a new tune for the CHIP IT chip as we are heading to Bathurst on Friday with the camper.... Can't wait!!