Azzas 120 GXL

[Madkore Avid PP Poster! Find all posts View Profile Close Madkore]

Geez you are tough on yourself - but I tend to be my harshest critic too.

Thumbs up for giving it a crack. I won't even care to admit how many versions of a fishing rod holder I have gone through.

Look at the positives:
- You know what to do next time.
- You probably learnt something.
- You no doubt saved a heap of coin.

[butane8 Avid PP Poster! Find all posts View Profile Close butane8]

hi Aaron, coming along nice mate good build up ... have you had a chance to install the power plugs? whats your thoughts...
been running mine for 6 months now, and i am happy with the fuel numbers and performance .... cheers butane

[120prado Junior Member Find all posts View Profile Close 120prado]

hi Aaron, coming along nice mate good build up ... have you had a chance to install the power plugs? whats your thoughts...
been running mine for 6 months now, and i am happy with the fuel numbers and performance .... cheers butane

hey butane, yeah i put them in when i last service the rig. you can notice the difference but there are too many limiting factors with the exhaust to get the best out of them i think. looking at changing all that tho. The extractors need to go thats for sure. but the pipe work it horrific under the prados.
Ive already swapped out center muffler and there were some definite gains there.
Once ive done the exhaust ill be looking to get the computer tuned to then maximize the better flow rate in and out with utilizing the better spark.

[120prado Junior Member Find all posts View Profile Close 120prado]

well its been awhile since i updated this and now that i have some spare time here we go, and where to start.

Roof console has been remade and almost finished just need to get it vinyl wraped.
Have painted my rims satin black
Wired up awning with 2 sets of LED strips (wires concealed in poles with switch on awning as well, can have 1 or both strips on.)
Wired LED strip underbonnet with pressure switch (incase of a night time break down)
Has new pioneer single din head unit with 6x9 JVCs in front doors with 6" JVCs in rear doors
Shovel holder on roof rack
And fuse block, Power distribution pack and grounding bar

[120prado Junior Member Find all posts View Profile Close 120prado]

Will try get some photos tonight of underbonnet LEDs

[120D4D Avid PP Poster! Find all posts View Profile Close 120D4D]

Nice work Azza, geez those rims look sh#t-hot in black with the muddies!

Cudo's on the roof console too.

[Smithy - 120 D4D Senior Member Find all posts View Profile Close Smithy - 120 D4D]

love the under awning lights - how did you run wiring from power source to the awning?

[120prado Junior Member Find all posts View Profile Close 120prado]

cheers guys. i'm topped with how the rims turned out.

Simthy as for the awning LED i ran them along side the wiring for my work lights and then through the back of the awning plate, pictures below, i drilled a 10mm hole in the top of rear door jamb and using a rubber grommet ran the wires upto roof rack.





and couple pictures of under bonnet LED, switch is just a pressure switch that cuts the earthing when bonnet is closed.

[Smithy - 120 D4D Senior Member Find all posts View Profile Close Smithy - 120 D4D]

very neat, and nicely done on both counts. Thanks for posting those images.