The Palmer's 120

[Palmer Advanced Member Find all posts View Profile Close Palmer]

Majorp, the tint is listed as Octane on the invoice. Was from a company associated with Tint-a-car.

[Majorp Lurker Find all posts View Profile Close Majorp]

Thanks mate I need to get mine redone.

[Palmer Advanced Member Find all posts View Profile Close Palmer]

The awning came in very handy on weekend! Kept things much cooler than previously.

[Palmer Advanced Member Find all posts View Profile Close Palmer]

With our little Jayco as we were preparing to leave from our long-weekend of camping.

[Palmer Advanced Member Find all posts View Profile Close Palmer]

Found this going for a good price today, so it's been added to my evergrowing list of things that I've got to fit to the Prado

[Palmer Advanced Member Find all posts View Profile Close Palmer]

And to think, I'd just conviced the wife we didn't need to worry about how we could get a winch before we do our Simo crossing. When "Bam!"I turn up at home with one.

[Palmer Advanced Member Find all posts View Profile Close Palmer]

Finally fitted rear fold down shelf. After having all the bits sitting around the shed for past month or so.

[Palmer Advanced Member Find all posts View Profile Close Palmer]

Did the St Alban bay track a couple of weeks ago, I certainly learned the effects of tire pressure. All of us failed to make it over first big dune at 18 or 20psi, but when we all dropped to 15psi the prados made it over nicely (as did other vehicles). A lesson well learned

[Smithy - 120 D4D Senior Member Find all posts View Profile Close Smithy - 120 D4D]

I'm just glad we figured the problem out (with some other blokey help) before our wives provided the required advice!

[Palmer Advanced Member Find all posts View Profile Close Palmer]

I'm just glad we figured the problem out (with some other blokey help) before our wives provided the required advice!

Oh Yeah, we'd have never lived that down.

[Palmer Advanced Member Find all posts View Profile Close Palmer]

Rear shelf. Still got to tidy a few bits up, but it's in.

[Ghost Advanced Member Find all posts View Profile Close Ghost]

They are a handy bit of kit


Sent from my iPad using Tapatalk HD

[Palmer Advanced Member Find all posts View Profile Close Palmer]

Thought I was finished the fold down table, as had trimmed all screws etc., but there's a bit too much flex in the sheet, so night have to run a bit of alli angle to stiffen it.

[Palmer Advanced Member Find all posts View Profile Close Palmer]

My "budget" sand flag can be seen in a pic in Smithy's rig build, post #9. An old rod with a flag the missus grabbed from a toy shop.

Knocked-up the mounting point from an alluminium attachment that was redundant due to damage to part of it (which got chopped off anyway)


Heard the flag smack a few overhanging branches and it survived, so I'm pleased - even if I do cop a bit of crap about the "pretty" flag.

[Palmer Advanced Member Find all posts View Profile Close Palmer]

Finally got the draws trimmed and installed properly. Just got to put a "wing" of the side of the draws to finish it off.