Announcement
Collapse
No announcement yet.
Oli's 120 D4D Manual
Collapse
X
-
ARGHHHHHHHH
so my front diff still is causing me issues. after 30,000k's its still producing alot of material.
So i'm taking an oil sample and having it sent away for analysis to try and get to the bottom of the issue.
its either mis aligned bearings (possibly a warped front housing) or both sets of Nitro gears for the front have been overly soft.
Comment
-
so still waiting on an advanced report on the oil sample.
i did manage to pick this up for $100 fits like a glove and plug and play. my cd stacker was dodgey and the bluetooth sounded like i was underwater so a welcome upgrade. now on the hunt for a reversing camera to suite. I also need to find where the reversing camera wires are in the rear door. i'm lead to believe that they are pre-wired in 2008 / 2009 120's
Comment
-
Reverse Camera Installation
so after getting the hilux headunit (PZQ60-00051) I took the plunge and grabbed the eclipse BEC113 reverse camera.
This reverse camera is compatible with the factory toyota headunits and is a direct fit.
Being a 2008 built vehicle its pre-wired with the reverse camera plug tucked in the rear door.
Some people will need the reverse camera patch lead PZQ60-000110 (I needed this in my December 2008 120) to feed the camera wires into the factory 20pin connector.
NOTE: some headunits have the camera 4pin plug on the rear of the stereo so this patch lead is not required.
I've done some notes on the below image to show where each plug / wire goes.
for me it was just a case of connecting the Green Wire to a 12v reverse signal wire. I've previously tapped the red wire behind the passenger side kick panel for my kaymar tyre spacer and reverse light so that was easy to find again. (see post #2 for details on its location
Last edited by HugoStiglitz; 01-11-2021, 11:56 AM.
Comment
Comment