Hollywood's 2010 150 series build.

[Hollywood Member Find all posts View Profile Close Hollywood]

Finally got around to fitting a few extras so thought I throw a few pics up.

Here she is when I bought it in Dec 2014.


Stuck an ARB bar on it.


Put some Roadsafe recovery points on it.




Gave the EGR valve a clean!




Got a Rhinorack Pioneer platform fitted. I fitted the Maxtrax mounts when I got home and then very gingerly drove it out of the garage, I had measured it but didn't think it would be that close!

[kenny5000 Advanced Member Find all posts View Profile Close kenny5000]

Not much room there!!

[Ian Reid Advanced Member Find all posts View Profile Close Ian Reid]

Looks like time to move house ....


Sent from my iGizmo using Tapatalk

[mjrandom Out of control poster! Find all posts View Profile Close mjrandom]

Looks like time to move house ....

The garage needs a lift kit, that's all.

[Hollywood Member Find all posts View Profile Close Hollywood]

A wife, three kids, a full tank of gas and camping supplies for Moreton Island dropped it a bit more! It also doesn't help that my driveway is pretty steep.

[Hollywood Member Find all posts View Profile Close Hollywood]

Installed one of AMTS's brackets with an ARB compressor, rotated the manifold 180° and the pressure switch and outlet fit perfectly. Also fitted a Stanadyne FM100 30micron primary filter, ran the factory fuel line into the primary filter so if I ever want to take the setup out I can just reconnect the factory line to the factory filter and it all looks original again.

[mjrandom Out of control poster! Find all posts View Profile Close mjrandom]

Why is your engine bay so clean? Please explain!








Noice.

[Hollywood Member Find all posts View Profile Close Hollywood]

It's particularly clean at the moment having just cleaned half of Moreton island out of it!

[MYT150 Member Find all posts View Profile Close MYT150]

Did you use the ARB loom or make your own? Just wondering as I need to fit mine shortly, just got to finish the other wiring first, or I won't be able to get at it.

[Hollywood Member Find all posts View Profile Close Hollywood]

I butchered the ARB one. The ARB loom is setup with wiring and connectors for two diff locker solenoids and switches. I don't have any lockers so I just altered the loom to suit my needs.

[MYT150 Member Find all posts View Profile Close MYT150]

Thanks, I was thinking that would be what I would have to do.

[Hollywood Member Find all posts View Profile Close Hollywood]

Here's my wiring diagram for the compressor, pretty straight forward, even for me!

[Hollywood Member Find all posts View Profile Close Hollywood]

Put on some DBA T2 front rotors tonight. Had an issue with what I think was warped rotors and knew that they had been skimmed twice already so went with some new ones.

There's a noticeable difference in the braking, the pedal is much firmer and the issues I had with pulsating and shimmying under braking are gone. Rotors and Bendix pads were $409 delivered.

[Hollywood Member Find all posts View Profile Close Hollywood]

Fitted a transmission cooler using TIN175's brackets today.

[Hollywood Member Find all posts View Profile Close Hollywood]

My vehicle has the dreaded 1500rpm right front guard rattle so I spent a few hours tonight (and about $50) fitting Dynamat to the inside of the guard. The 'rattle' has been reduced dramatically, all I can hear now is the engine, very happy with the results.