SIK-120 : Steve's 08 D4-D

[Peterpilot Avid PP Poster! Find all posts View Profile Close Peterpilot]

Also this set-up won't work unless you have some nice long flexy coils in the rear, most rear springs will just fall out at max droop

[8608 Advanced Member Find all posts View Profile Close 8608]

Also this set-up won't work unless you have some nice long flexy coils in the rear, most rear springs will just fall out at max droop

ooops. Forgot to add rear coils. Added to my previous post.

Thanks for pointing it out.

[Justw8 Lurker Find all posts View Profile Close Justw8]

Hey mate if u don't mind could u give me a rough cost all up and suppliers for these parts? Thanks

[Madkore Avid PP Poster! Find all posts View Profile Close Madkore]

Just throwing it out there, but I would imagine a set up like that would be around the $4000 mark.

Its almost at the point that if you are asking, you can't afford it.

[MUMSRIG Avid PP Poster! Find all posts View Profile Close MUMSRIG]

This is everything that I wanted to do suspension wise.... Unfortunatley it's nothing i can do though as MUMSRIG wouldn't be very practicle for Tam.. But I am certainly in awe of the flex and travel you are getting...

Nice work!

[Justw8 Lurker Find all posts View Profile Close Justw8]

Just throwing it out there, but I would imagine a set up like that would be around the $4000 mark.

Its almost at the point that if you are asking, you can't afford it.

Or it could be at the point where no one does a kit or knows much about the prado lifts beyond 50mm so i'm asking!!!!

[8608 Advanced Member Find all posts View Profile Close 8608]

just roughing out the figures...

$450/pair - MS59-708 FRONT STRUTS
$220/pair - C59-314 FRONT COILS (middle groove)
between $450 and $850 - SPC 25470 FRONT UCA'S
$200 - min. 35mm front diff drop spacers
$260/pair - C59-443V REAR COILS
$340/pair - GS59-682 REAR SHOCKS (with sway bar in)
same as above - GS59-687 REAR SHOCKS (with no sway bar)
$350/pair - SUPERIOR REAR LCA'S
$20 - VSPV ext bracket
$30 to $100 - extended rear brake line(s)

plus a labour if you can't DIY.

[Madkore Avid PP Poster! Find all posts View Profile Close Madkore]

Relax Justw8 - wasn't having a pop at you.

Seems I wasn't that far off if you include labour and a wheel alignment.

Superior Engineering do a 4 inch lift for the 120 Prado. cwb has it on his recently purchased Prado - see http://www.pradopoint.com/showthread...0-rig-2004-gxl

[Justw8 Lurker Find all posts View Profile Close Justw8]

Ok madkore bit hard to tell with forums. thanks 8608

[hore1984 Junior Member Find all posts View Profile Close hore1984]

That looks great 8608, just one question that I dont think has been asked, how far out is you speedo?

[8608 Advanced Member Find all posts View Profile Close 8608]

That looks great 8608, just one question that I dont think has been asked, how far out is you speedo?

From New the speedo was 5% faster than actual speed. 265s put it spot on. Now the speedo is about 8% slower than actual speed.

[8608 Advanced Member Find all posts View Profile Close 8608]

[8608 Advanced Member Find all posts View Profile Close 8608]

some pics of my last IFS mega flex projects.

[8608 Advanced Member Find all posts View Profile Close 8608]

[8608 Advanced Member Find all posts View Profile Close 8608]

not ifs, but much much cheaper to wheel.