Cheers Mike. I can't wait to do more stuff to it.
Nah no speaker in the handpiece but the speaker in the main unit is plenty loud enough. Mine sounds like it's just behind the cup holder or thereabouts and I have no dramas hearing it over the stereo.
Cheers
150 VX diesel. Awesome bonnet protector! Monster Rides 3" Susp Lift, 265/70/17 MT MTZ's on Dick Cepek Torques, TJM T13 bar,TG150 Guard, Airtec Snorkel, Lightforce HID's, GME TX3540, CKMTA12 compressor, redarc dual bats, Drawers, fridgy drop slide, Maxtrax, More to come... one day!
[URL="http://www.pradopoint.com/showthread.php?18807-ages-150-VX-D4D-black"]My Rig Buildup[/URL]
Cheers Mike. I can't wait to do more stuff to it.
Nah no speaker in the handpiece but the speaker in the main unit is plenty loud enough. Mine sounds like it's just behind the cup holder or thereabouts and I have no dramas hearing it over the stereo.
Cheers
Ages...you dont have a red VX Clubby do you ?
2010 Kakadu with all the usual stuff.... Build up thread below
[url]http://www.pradopoint.com/showthread.php?21930-Daz-s-2010-Kakadu-is-getting-some-lovin&highlight=daz%27s+kakadu[/url]
I'm also on the LS1 Forums and there is a Perth bloke on there with a very Quick VX and his user name is AGE..
2010 Kakadu with all the usual stuff.... Build up thread below
[url]http://www.pradopoint.com/showthread.php?21930-Daz-s-2010-Kakadu-is-getting-some-lovin&highlight=daz%27s+kakadu[/url]
So being one of the six people wordwide that doesn't seem to want to put a rack on their roof, I decided to pursue this road and try and gain an extra few inches in the garage for when the lift and new shoes finally go on. All the parts are avail from Toyota and was about $180 all up. Plus about $10 for thread locker.
Won't go into taking the rails off. That's already been well documented in other threads. But here are the clips. There is a little arrow on them that has to face towards the middle of the car. Otherwise the plastic clip doesn't line up with the rest of the rubber insert
I had been look for a while for somebody to produce a 3" lift for a prado with KDSS, but it seemed all to hard for just about everybody. But thanks to Shamozzle on PP i got put onto Monster Rides who were only just getting a kit together to suit the 150's and were more than happy to have a crack at putting it on mine. The whole process was a bit of suck and see along the way, But Cam from Auto transmission r us in Balcatta certainly seems to know his stuff. Aparently there were a few issues with the KDSS but nothing too major. There is still a front diff drop bracket to go in the take some angle off the CV's. The one that was sent with the kit didn't quite fit properly so they are going for a redesign.
any ways... some pics!
BEFORE
AFTER
150 VX diesel. Awesome bonnet protector! Monster Rides 3" Susp Lift, 265/70/17 MT MTZ's on Dick Cepek Torques, TJM T13 bar,TG150 Guard, Airtec Snorkel, Lightforce HID's, GME TX3540, CKMTA12 compressor, redarc dual bats, Drawers, fridgy drop slide, Maxtrax, More to come... one day!
[URL="http://www.pradopoint.com/showthread.php?18807-ages-150-VX-D4D-black"]My Rig Buildup[/URL]
Comment