AMTS 120/150 Prado & FJ bash plates. SA made/supplied.

[ondaboat Coopers Pale Ale Find all posts View Profile Close ondaboat]

Here is a pic of the plate meeting the ARB Plate at mentioned radiator cross member on the 120

Regards Adam

[CASTOY Junior Member Find all posts View Profile Close CASTOY]

Amts. Interested in transfer guard. Have 1kz120, 2004 grande. Also noted you have a diff drop. Do you supply this kit also or is by someone else.
Cheers
Castoy

[Guest Close Guest]

Here is a pic of the plate meeting the ARB Plate at mentioned radiator cross member on the 120

Regards Adam

Thanks for that photo Adam.

Amts. Interested in transfer guard. Have 1kz120, 2004 grande. Also noted you have a diff drop. Do you supply this kit also or is by someone else.
Cheers
Castoy

Hi Castoy,
Will do, currently waiting on the trasnfer guard prototype.
Yes, I supply the diff drop kit too @ $40 a set. The set contains the 2x diff spacers, 2x longer diff HT bolts, 2x nylock nut, 4x HT flat washers. Note that spacers for the bashplates are not included for diff drops if you have aftermarket bashplates. My bashplates have been designed to suit a 1" diff drop without needing other spacers.

[mackayvx Advanced Member Find all posts View Profile Close mackayvx]

Gday amts,

Top work on these plates...
I have dropped you an email with all of my info - Im very keen for a set!!

Cheers Drew

[MidLifeCrisis Out of control poster! Find all posts View Profile Close MidLifeCrisis]

amts

I was under my rig and noticed the middle exhaust and rear exhaust on my 3inch stainless steal Mantra system are close to destroyed! The guy looking with me suggested I should have put some of that (your) "kick 4r$e plate there too!

Reality is should have.....

[Gunnell Junior Member Find all posts View Profile Close Gunnell]

Hi Andrew,

Im feeling naked!!!,

Any idea on time frame?..my bars have arrived, just awaiting a fitting date but expect to do the drive to Geelong perhaps next week...

[gumboot Avid PP Poster! Find all posts View Profile Close gumboot]

1. Yes they will fit with ARB bars. It meets up with the shrouds on both the 120 & 150.
2. Yes they are compatible with transfer case guards by Brains.

Perfect Thanks.PM sent.
Cheers

[gumboot Avid PP Poster! Find all posts View Profile Close gumboot]

Here is a pic of the plate meeting the ARB Plate at mentioned radiator cross member on the 120

Regards Adam

Thanks Adam,
That was exactly what I was after.
Cheers

[Guest Close Guest]

mackayvx,
I have responded to your email.

MLC,
Might have to build subframes to protect the exhaust. Not sure how doable this is at this stage.

Gunnell,
Bashplates are currently at the platers. I'll be picking up your set tomorrow for the colour coding at a different powder coaters. Hopefully they'll be on your FJ on the weekend or early next week.

Gumboot,
I'll respond to your PM a bit later today.

It looks like the bashplates will all be powdercoated at the end of this week. Major apologies for the delay. I'll be contacting those on the list with the payment balance this week.

[wooley Avid PP Poster! Find all posts View Profile Close wooley]

Gunnell,
Bashplates are currently at the platers. I'll be picking up your set tomorrow for the colour coding at a different powder coaters. Hopefully they'll be on your FJ on the weekend or early next week.

Woah woah woah... Different colour powder coating? I'd like mine done in pink too please.

[craigm Addicted PP Member Find all posts View Profile Close craigm]

Sorry wooley, I think Pink is reserved only for Richo

[stewy Advanced Member Find all posts View Profile Close stewy]

Hello AMTS,

Am curious if your plates for the FJ will still fit up fine to an FJ with the ARB Deluxe Combo Bar.
I see Gunnell has them for his FJ, but not sure if he has plans for a bar though.

cheers

[MidLifeCrisis Out of control poster! Find all posts View Profile Close MidLifeCrisis]

MLC,
Might have to build subframes to protect the exhaust. Not sure how doable this is at this stage.


It looks like the bashplates will all be powdercoated at the end of this week. Major apologies for the delay. I'll be contacting those on the list with the payment balance this week.

Do you still have my details for fitting the tfr plate?

[Guest Close Guest]

Hello AMTS,

Am curious if your plates for the FJ will still fit up fine to an FJ with the ARB Deluxe Combo Bar.
I see Gunnell has them for his FJ, but not sure if he has plans for a bar though.

cheers

My plates replicate the 2 tapped holes on the factory bashplates. The plates on the ARB bar on wooley's Prado utilizes the same 2 tapped holes, so they meet up nicely on the 150. As for the FJ, I assume that ARB will be doing the same thing as the factory bashplates on the FJ are near identical to the 150.

Gunnell is putting Expedition One front and rear bars on his FJ.

[Guest Close Guest]

Picked up Gunnell's plates after work yesterday. Going into the powder coaters on Monday morning.


The rest are still at the platers. Not long to go now.