ARB/TJM air compressor & fuel filter bracket for 120/150

[Cookie120 Junior Member Find all posts View Profile Close Cookie120]

Hi Andrew,
Is the MK1 available? I have a CKMA12 mounted on the front right wheel arch of my V6 and with a second battery behind the headlight I am concerned my upcoming snorkel installation will mean the compressor has to move.
Thanks

[Guest Close Guest]

Hi Andrew,
Is the MK1 available? I have a CKMA12 mounted on the front right wheel arch of my V6 and with a second battery behind the headlight I am concerned my upcoming snorkel installation will mean the compressor has to move.
Thanks

Yes it is but I need to know whether you have the larger charcoal canister or not. Refer to first post that has the photo of the large charcoal canister.

Currently the brackets don't fit the V6 with the large charcoal canister. I don't have access to a Prado, otherwise I would look at shifting the canister forward.

[Cookie120 Junior Member Find all posts View Profile Close Cookie120]

Yes it is but I need to know whether you have the larger charcoal canister or not. Refer to first post that has the photo of the large charcoal canister.

Currently the brackets don't fit the V6 with the large charcoal canister. I don't have access to a Prado, otherwise I would look at shifting the canister forward.

I'm pretty sure I don't have the large canister, I will check when back home tomorrow.. Thx.

[Guest Close Guest]

I'm pretty sure I don't have the large canister, I will check when back home tomorrow.. Thx.

What year model is your Prado? I think only the 03-04 year models have the smaller canister.

[Cookie120 Junior Member Find all posts View Profile Close Cookie120]

What year model is your Prado? I think only the 03-04 year models have the smaller canister.

My 120 is an April 05 build and has the small canister, so I'm confident it will fit if I end up needing to relocate the compressor from current location.

[Guest Close Guest]

My 120 is an April 05 build and has the small canister, so I'm confident it will fit if I end up needing to relocate the compressor from current location.

OK noted.

[Guest Close Guest]

Upon request, the Mk2 bracket can now take a CTEK D250S instead of a compressor.

[znelbok Member Find all posts View Profile Close znelbok]

What about a Redarc BCDC?

[Guest Close Guest]

what about a redarc bcdc?

A BCDC1220? It has the potential to fit.

[znelbok Member Find all posts View Profile Close znelbok]

Will the FM100 fit when the transparent bowel and the water detection harness is attached?

I suppose if it does not it then the short filter would have to be used.

The BCDC1225 should fit with it sticking out the top a little (and only three mounting bolts used isntead of four). Its only 30mm longer. How much clearance is there between the bracket and the underside of the bonnet? Why does the bracket have the drop in it (the part behind the BDCD in your last rendering). Ifit was straight the 1225 would probably bolt in as well.

Mick

[Guest Close Guest]

Will the FM100 fit when the transparent bowel and the water detection harness is attached?

Not sure as I will need some dimensions to check.

The BCDC1225 should fit with it sticking out the top a little (and only three mounting bolts used isntead of four). Its only 30mm longer. How much clearance is there between the bracket and the underside of the bonnet?

Quite possible will fit. There is quite a bit of clearance to the bonnet. Unsure how much but in the vicinity of a few inches.

Why does the bracket have the drop in it (the part behind the BDCD in your last rendering). If it was straight the 1225 would probably bolt in as well.

It was sloped to allow for the larger cable looms in the Kakadu in that area. I do have the straight version as one of the prototypes which you can modify yourself to fit the BCDC1225.

[Guest Close Guest]

The BCDC1225 and 1240 won't fit without mods - i.e. drilling holes into the base of BCDC1225 and 1240 to match that of the BCDC1220.
Picture below are the 2 units overlaid on each other. The BCDC1225 and 1240 have the same body.

[znelbok Member Find all posts View Profile Close znelbok]

Thanks for checking. I can probably work something out to mount one.

[AussieAndy Find all posts View Profile Close AussieAndy]

Just another quick question, do the arb airlocker solinoids fit on the CKMA12 in the combo bracket? Have read the thread but can't seem to find them mentioned

[Guest Close Guest]

Just another quick question, do the arb airlocker solinoids fit on the CKMA12 in the combo bracket? Have read the thread but can't seem to find them mentioned

There should be room for them.