Originally posted by Snaga
View Post
Announcement
Collapse
No announcement yet.
ARB/TJM air compressor & fuel filter bracket for 120/150
Collapse
X
-
Guest replied
-
Cool...
Can you check and see if I'm on the waiting list... I have no idea if I ever sent an email to be honest
Originally posted by amts View PostOrdering Monday. I haven't got a reply from the PP member in ACT for test fitting in the Kakadu, so I'm going ahead with the order anyway as the bracket will fit 95% of owners out there.
Leave a comment:
-
Guest repliedOriginally posted by Snaga View PostSounds great...
... soon to hit production?
Leave a comment:
-
Sounds great...
... soon to hit production?
Originally posted by amts View PostAlso, the Combo bracket will now suit the:
- TJM, and both ARB CKMA12 and CKMP12 compressors
- Racor 230 and Stanadyne FM100 fuel filters
The TJM and ARB CKMP12 (portable) compressor will require a custome bracket.
The Stanadyne FM100 will also require a custom bracket (orange in the pics below)
[ATTACH=CONFIG]13307[/ATTACH][ATTACH=CONFIG]13308[/ATTACH]
Leave a comment:
-
Guest repliedAlso, the Combo bracket will now suit the:
- TJM, and both ARB CKMA12 and CKMP12 compressors
- Racor 230 and Stanadyne FM100 fuel filters
The TJM and ARB CKMP12 (portable) compressor will require a custom bracket.
The Stanadyne FM100 will also require a custom bracket (orange in the pics below)
Last edited by amts; 12-10-2013, 03:28 PM.
Leave a comment:
-
Guest repliedOriginally posted by Wagon Man View PostAndrew,
Do you have a waiting / pre order list for the combo bracket?
Bill
Leave a comment:
-
Andrew,
Do you have a waiting / pre order list for the combo bracket?
Bill
Leave a comment:
-
Guest repliedOriginally posted by ptnlinda View PostAMTS
Silly question time. Which ARB compressor is the combo bracket designed for?
The compressor only bracket can take both CKMA12 and CKMP12 as is.
Leave a comment:
-
AMTS
Silly question time. Which ARB compressor is the combo bracket designed for?
Leave a comment:
-
C'mon Piggy, quit distracting the man!!! I need amts to forget about these compressor brackets for those dirty stinky diesels and get on with finishing off my Bash Plates!!!!
Leave a comment:
-
Guest repliedOriginally posted by Piggy View PostI have a couple different VIAir compressors in the WHouse AMTS.
VIAir will fit in same spot as ARB/Tjm. Might be worth you having a look at.
I won't run the generic ARB etc again, seen too many failures on them now.
Cheaper than ARB too and good for 200PSI.
Leave a comment:
-
Guest repliedI have a couple different VIAir compressors in the WHouse AMTS.
VIAir will fit in same spot as ARB/Tjm. Might be worth you having a look at.
I won't run the generic ARB etc again, seen too many failures on them now.
Cheaper than ARB too and good for 200PSI.
Leave a comment:
-
Guest repliedOriginally posted by Talktheroo View PostAndrew, you just can't please everybody. Mate, while it would be good to do the TJM compressor, I think most people would be happy with just purchasing the ARB compressor and the Racor 230R10.
The blank plug will fit in there, no worries. You can just cut off those compressor mounting bolts, anyway. When I fit one of these, that's what I will be doing.
On the inlet you would run a 90 degree barb and a straight barb on the outlet.
I have been telling people about this project, and I know Snaga is waiting on one. There are a few people actually.
The big business, in my opinion, will be selling them to ARB, or TJM, if you to design one for their compressor.
This bracket will kill both problems. Patents come to mind, Andrew.
I know it's already got some patents, wink, wink.
I have now run the TJM compressor up in that position, and it runs fine.
Catch you later, John.
I have also checked with TJM and their compressor is fine to be used vertically.
Leave a comment:
Guest
Guest
Guest
Guest
Guest
Guest
Guest
Guest
Guest
Leave a comment: