Originally posted by Trekrider
View Post
Announcement
Collapse
No announcement yet.
ARB/TJM air compressor & fuel filter bracket for 120/150
Collapse
X
-
Originally posted by amts View PostAs per our email correspondence, it appears that Trekrider has found a snag with brackets. The charcoal canister on my 2003 Grande is different to his 2006 GXL. Rummaging through toyodiy, there appears to be 2 part numbers listed for the charcoal canister and its bracket from 2005 onwards. But only 1 part number listed for 2003 and 2004 120s. I have emailed those with a V6 and those who did not state whether they have a V6 or a diesel to check the size of the charcoal canister.
The larger canister is fitted from 2005 onwards and uses one of the side holes on the guard. This larger canister is not compatible with the ARB compressor bracket unless it can be moved.
This does not affect diesel models. (At least I don't think so).Geoff
Im not Bogged - I've just lost traction. . . . . and now I'm showing the wife why I bought those Maxtrax, and the tyre deflator, and the compressor, and the bullbar, and the winch, and a lot of other goodies I've hidden in the Prado
Comment
-
Originally posted by Geoffury View PostHey Andrew, does this also effect the 150 V6's?
Can you post a pic of the charcoal canister?
Looking at the bonnet strut forwards, there should be 2 free tapped holes on the side guard in order for the compressor bracket to fit.
Here is a photo of the larger charcoal canister (courtesy Trekrider) which is not compatible with the compressor bracket.
Last edited by amts; 18-04-2013, 08:34 AM.
Comment
-
Originally posted by Hazza View PostCombo bracket looking good there Andrew.
My Racor with filter and bowel is 235 mm from the top of the bracket to the bottom of the drain. The drain screws in to open so will not be any longer. Does your bracket fit this with room to spare? Happy to post more dimensions if you wish.
Hazza
The bottom/floor of the bracket is sloped. Currently it is 225mm at the high side and 237mm at the low side. I will make it a bit higher so it can fit.
Comment
-
Originally posted by Talktheroo View PostAndrew, I forgot about the TJM measurement thing. A member reminded me on Friday last week. I am on a break today, so will do them for you. I will put up some photos as well.
The bracket for the filter and the compressor is a great idea I reckon.
John.
Comment
-
Originally posted by amts View PostHazza,
The bottom/floor of the bracket is sloped. Currently it is 225mm at the high side and 237mm at the low side. I will make it a bit higher so it can fit.
Just a few images to assist.
http://s5.postimg.org/dnxdfl5t3/Racor_Filter_2.jpg
http://s5.postimg.org/8nzx7n06f/Racor_Filter_1.jpg
http://s5.postimg.org/56xv4o147/Racor_Filter_3.jpg
http://s5.postimg.org/rk5lrh21z/Racor_Filter_4.jpg
http://s5.postimg.org/ncatiq0mf/Racor_Filter_5.jpg
http://s5.postimg.org/teig97p2f/Racor_Filter_6.jpg
http://s5.postimg.org/gbrf3oo87/Racor_Filter_7.jpg
HazzaSilver 120 Series Diesel GXL 2009 with Option Pack 2, king Springs 2" Lift with 'H' front spring, MT ATZ 4-RIB, Dual Battery, Deluxe ARB Bull-bar, Winch, Towbar, Anderson 50 amp plug at the rear, Weather Shields, Bonnet and Head Light Protectors, Rubber Mats inc Cargo mat, UHF Ariel, Portable Uniden UHF plugs into areal, On-board ARB Compressor, Brains Black Box TG150 Protector, Rear Black Duck Seat Covers.
Comment
-
Amts dropped off my bracket today, very well made and finished. Well done amts, and thank you for bringing this project home!
Michael2008 D4D M6 GXL [MT ATZ-P3][Whitey's Ironman 45710FE/45682FE+KTFR101H/Dob487][extended Roadsafe links][Polyairs][DBA T3/T2][amts diffdrop & recovery points][Tin175's stone guards][Bushskins BashPlate][ARB Sahara][IPF 900s][Snorkel][WindCheetah][MaxTrax][IC-440][Parrot Asteroid][ARB Fridge][Lifestyle 2nd Row Fridge Mount][ARB Compressor][Thumper][SandGrabbers][Cargo Barrier][Tigerz Awning][MCC Rear Bar]
Comment
-
Originally posted by Hazza View PostAndrew,
Just a few images to assist.
http://s5.postimg.org/dnxdfl5t3/Racor_Filter_2.jpg
http://s5.postimg.org/8nzx7n06f/Racor_Filter_1.jpg
http://s5.postimg.org/56xv4o147/Racor_Filter_3.jpg
http://s5.postimg.org/rk5lrh21z/Racor_Filter_4.jpg
http://s5.postimg.org/ncatiq0mf/Racor_Filter_5.jpg
http://s5.postimg.org/teig97p2f/Racor_Filter_6.jpg
http://s5.postimg.org/gbrf3oo87/Racor_Filter_7.jpg
Hazza
Comment
-
Originally posted by Talktheroo View PostFinally Andrew.
Without the tray : Height-195mm with the handle. You could easily take off that handle. Take 25mm off for that.
Length-274mm
Width-100mm
There is now a few customers of mine and PP members up here that are interested in this bracket. This compressor does come out of the same factory as the Dr. Air units I think.
Sorry I took so long to get you these measurements. If the TJM thing fits into the bracket, I will pull that bottom plate off and measure the feet for the holes.
Catch you later, John.
Comment
-
Amts...I'd be interested in the combined compressor (TJM/ARB?), Parker Racor 230R or 120 fuel filter/water separator bracket. I'm not 100% into fuel filters or what I'll end up with so here is a useful link I found:
http://www.maesco.com/products/racor...tml#specchart1
Maybe you can design one that takes both the filters I've mentioned....not that I'm being fussy or anything....may get yourself a larger market share but lesser costs!!??
Cheers.[SIZE=1]03 TD 120 Grande, L&R weathershields, f&r deflectors, Sov bar Amts rad b.pl, TJM front B.P, Uniden UH7760NB Kaymar LED worklight, ARB 47l, lifestyle rack & Milford C. Barrier, 9500llb Superwinch, IPF 900SR spots, T. Dog 40mm adj shocks/struts, coils, airbagman OA6011 airbags, 2.75" Beaudesert exhaust, 300w inverter, 1L Catch can,outback rec points, R.R awning, dual batteries redarc SBI12 Cooper LT A/T3's 265/65, Safari snorkel, Hilux jets, Brains TG150, Leigh's booster diode [/SIZE]
Comment
-
Originally posted by amts View PostThanks John. Would be real handy to find one to draw up and chuck it into the CAD model. How much are these units?2008 D4D M6 GXL [MT ATZ-P3][Whitey's Ironman 45710FE/45682FE+KTFR101H/Dob487][extended Roadsafe links][Polyairs][DBA T3/T2][amts diffdrop & recovery points][Tin175's stone guards][Bushskins BashPlate][ARB Sahara][IPF 900s][Snorkel][WindCheetah][MaxTrax][IC-440][Parrot Asteroid][ARB Fridge][Lifestyle 2nd Row Fridge Mount][ARB Compressor][Thumper][SandGrabbers][Cargo Barrier][Tigerz Awning][MCC Rear Bar]
Comment
-
Originally posted by photoprado View PostNot sure they would be suitable for under bonnet mounting as the ARB job with all those motor vents though. They are listed at Rays Outdoors HERE (about $250 then) I think a mate of mine has one of these, I could try and borrow it if you want to measure it up for CAD?
Originally posted by Talktheroo View PostThey can go as low as $200.00 when they are on special from TJM. If you get stuck I will get out the calipers. Let me know what you want as in measurements.
John.
Comment
-
Originally posted by Talktheroo View PostFinally Andrew.
Without the tray : Height-195mm with the handle. You could easily take off that handle. Take 25mm off for that.
Length-274mm
Width-100mm
There is now a few customers of mine and PP members up here that are interested in this bracket. This compressor does come out of the same factory as the Dr. Air units I think.
Sorry I took so long to get you these measurements. If the TJM thing fits into the bracket, I will pull that bottom plate off and measure the feet for the holes.
Catch you later, John.
Looking at the top chamber, there appears to be 3 outlets. 1 looks like the air filter, 1 for the pressure gauge and 1 for the outlet. Would any of these be interchangeable and can the pressure gauge be removed and sealed off with a plug?
Comment
Comment